Difference between revisions of "Insaniti"

From RoboJackets Wiki
Jump to navigation Jump to search
(→‎Design Overview)
(→‎Issues)
Line 120: Line 120:
 
*Increase 3D printed back armour thickness <br />
 
*Increase 3D printed back armour thickness <br />
 
*Integrated ears on inner side plate <br />
 
*Integrated ears on inner side plate <br />
−
 
−
=Issues=
 
−
*There was a possibility of being flipped into a diagonal where the wheels could not move
 
−
*Did not have clearance for inverted mode
 
−
*Switch was stripped due to being in a awkward position and supported by only wires
 
−
*Belt would easily slipped off due to no tension
 
−
*Weapon motor did not adjustable positioning
 
−
**The groove on the pulley was not deep enough
 
−
*Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes
 
−
*Not very maneuverable
 
−
**Too friction by the aluminum stand
 
−
**Not enough traction from the foam wheel
 
−
**Not enough drive motor power
 
−
**Back wheel drive meant imprecise forward movement(more testing) 
 
−
**Center of gravity not being on wheel
 

Revision as of 22:11, 25 February 2022

Insaniti
Insaniti Image
Year Of Creation 2021-2022
Versions
Current Version V 1.0
Update Year 2021-2022
Wins/Losses 0/2
Information and Statistics
Weight Class Beetleweight
Weapon Class Vertical Disk
Combined Wins/Losses 0/2
Weapon Speed Estimated 7000 RPM
Other NA

Insaniti is a beetleweight robot designed, machined, and assembled during the 2021-22 schoolyear. It competed in the 2022 Motorama Robot Combat event. Insaniti is a two-wheeled box-shaped robot armed with a large vertically spinning disk weighing approximately 2.8 pounds. This guide will evaluate design considerations and their consequences.


Competitions

Motorama 2022

  • Results: 0-2
    • Bracket Style: Double Elimination
      • Loss versus Mombot
      • Loss versus Carrotz
        • Electronics issues due to faulty switch. Eliminated due to lack of movement after entering the Battle Box.
    • Grudge Matches:

Version

Insaniti V1.0

Created by:

Drive Motors Tunigy Aerodrive 2826 Brushless Motors (1 per side)
Drive Motor Controllers Twisted Hobbies 18A Reversible Brushless ESC
Weapon Motor Propdrive 2826 Brushless Motor
Weapon Motor Controllers Hobbyking 20A Brushless ESC
Receiver OrangeRx R610V2 Lite DSM2 Reciever
Remote Control Spektrum DX9 Black Edition
Battery 3s 1000mah battery provided by RoboJackets

Design Summary

  • Weapon
    • Vertical spinner - egg beater
  • Chasis
    • 4WD optimized chassis made of waterjet aluminum
  • Drive
    • Timing belt driven brushless 4 wheel drive

Positives

Good weapon power and weapon bite, was able to do damage quickly
Drive speed is fast
The steering rate is fast
The structure did not take damage after all fights
Wedgelet setup was able to get under the opponents

Issues

  • Issues with the weapon pulley slipping because the teeth on the pulley stripped due to load and friction
  • Several electronic issues with wires breaking from repeated bending
  • Ears kept falling off due to adhesive not being strong enough
  • Weapon belt detaching after spinup from the weapon pulley

Changes to make

  • Stronger pulleys for drive (nylon) with taller sides and thin heat insert fit
  • Correct belt length for front (56t) (order more belts in general)
  • Higher weapon pulley walls
  • Magnets/magnet holders for steel floors
  • Screws to mount ears
  • Stronger main power wire
  • Top plate correct spacing to prevent holes breaking and make out of nylon
  • Motor cage thicker (flex less)
  • Diagonal battery tray
  • Stick with the long forks
  • Fail safe capable receiver (look at what brand the one we have rn is)
  • Increase 3D printed back armour thickness
  • Integrated ears on inner side plate
Retrieved from "https://wiki.robojackets.org/index.php?title=Insaniti&oldid=20229"