Difference between revisions of "Insaniti"

From RoboJackets Wiki
Jump to navigation Jump to search
(Design Overview and Evaluation)
(Chassis)
Line 56: Line 56:
 
=Design Overview and Evaluation=
 
=Design Overview and Evaluation=
 
==Chassis==
 
==Chassis==
 
 
 
 
 
 
 
 
Issues:
 
-There was a possibility of being flipped into a diagonal where the wheels could not move
 
-Did not have clearance for inverted mode
 
-Switch was stripped due to being in a awkward position and supported by only wires
 
-Belt would easily slipped off due to no tension
 
-Weapon motor did not adjustable positioning
 
-The groove on the pulley was not deep enough
 
-Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes
 
-Not very maneuverable
 
-Too friction by the aluminum stand
 
-Not enough traction from the foam wheel
 
-Not enough drive motor power
 
-Back wheel drive meant imprecise forward movement(more testing) 
 
-Center of gravity not being on wheel
 

Revision as of 21:10, 24 February 2022

Insaniti
Insaniti Image
Year Of Creation 2021-2022
Versions
Current Version V 1.0
Update Year 2021-2022
Wins/Losses 0/2
Information and Statistics
Weight Class Beetleweight
Weapon Class Vertical Disk
Combined Wins/Losses 0/2
Weapon Speed Estimated 7000 RPM
Other NA

Insaniti is a beetleweight robot designed, machined, and assembled during the 2021-22 schoolyear. It competed in the 2022 Motorama Robot Combat event. Insaniti is a two-wheeled box-shaped robot armed with a large vertically spinning disk weighing approximately 2.8 pounds. This guide will evaluate design considerations and their consequences.


Competitions

Motorama 2022

  • Results:
    • Bracket Style: Double Elimination
      • Loss versus Mombot
      • Loss versus Carrotz
      • Electronics issues due to faulty switch. Eliminated due to lack of movement after entering the Battle Box.
    • Grudge Matches:


Design Overview and Evaluation

Chassis