Insaniti

Insaniti
Year Of Creation	2021-2022
Versions
Current Version	V 1.0
Update Year	2021-2022
Wins/Losses	0/2
Information and Statistics
Weight Class	Beetleweight
Weapon Class	Vertical Disk
Combined Wins/Losses	0/2
Weapon Speed	Estimated 7000 RPM
Other	NA

Insaniti is a beetleweight robot designed, machined, and assembled during the 2021-22 schoolyear. It competed in the 2022 Motorama Robot Combat event. Insaniti is a two-wheeled box-shaped robot armed with a large vertically spinning disk weighing approximately 2.8 pounds. This guide will evaluate design considerations and their consequences.

Competitions

Motorama 2022

• Results:
  • Bracket Style: Double Elimination
    • Loss versus Mombot
    • Loss versus Carrotz
    • Electronics issues due to faulty switch. Eliminated due to lack of movement after entering the Battle Box.
  • Grudge Matches:
    • Loss versus Singulariti (Video Link:)

Design Overview and Evaluation

Chassis

Issues: -There was a possibility of being flipped into a diagonal where the wheels could not move -Did not have clearance for inverted mode -Switch was stripped due to being in a awkward position and supported by only wires -Belt would easily slipped off due to no tension -Weapon motor did not adjustable positioning -The groove on the pulley was not deep enough -Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes -Not very maneuverable -Too friction by the aluminum stand -Not enough traction from the foam wheel -Not enough drive motor power -Back wheel drive meant imprecise forward movement(more testing) -Center of gravity not being on wheel