Insaniti

From RoboJackets Wiki
Revision as of 21:25, 25 February 2022 by Sterala3 (talk | contribs) (Insaniti V 1.0)
Jump to navigation Jump to search
Insaniti
Insaniti Image
Year Of Creation 2021-2022
Versions
Current Version 1.0
Update Year 2021-2022
Wins/Losses 0/2
Information and Statistics
Weight Class Beetleweight
Weapon Class Vertical Disk
Combined Wins/Losses 0/2
Weapon Speed Estimated 7000 RPM

Insaniti is a beetleweight robot designed, machined, and assembled during the 2021-22 schoolyear. It competed in the 2022 Motorama Robot Combat event. Insaniti is a two-wheeled box-shaped robot armed with a large vertically spinning disk weighing approximately 2.8 pounds. This guide will evaluate design considerations and their consequences.


Competitions

Motorama 2022

  • Results: 0-2
    • Bracket Style: Double Elimination
      • Loss versus Mombot
      • Loss versus Carrotz
        • Electronics issues due to faulty switch. Eliminated due to lack of movement after entering the Battle Box.
    • Grudge Matches:

Version

Insaniti V 1.0

Created by:

Drive Motors
Drive Motor Controllers
Weapon Motor
Weapon Motor Controllers
Receiver
Remote Control
Battery

Design Summary

  • Weapon
    • Vertical Spinner
  • Chasis
  • Drive

Positives

Issues

  • There was a possibility of being flipped into a diagonal where the wheels could not move
  • Did not have clearance for inverted mode
  • Switch was stripped due to being in an awkward position and supported by only wires
  • Belt would easily slip off due to no tension
    • Weapon motor did not adjustable positioning
    • The groove on the pulley was not deep enough
  • Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes
  • Not very maneuverable
    • Too friction by the aluminum stand
    • Not enough traction from the foam wheel
    • Not enough drive motor power
    • Back wheel drive meant imprecise forward movement(more testing)
    • Center of gravity not being on wheel

Changes to Make