Skinni

Skinn0
Year Of Creation	2023
Wins/Losses	4/2
Information and Statistics
Weight Class	BeetleWeight
Weapon Class	Shell Spinner
Combined Wins/Losses	4/2

A 3lb shell spinner made in the style of Chonkiii. Skinn0 was named without the "i" as Skinni was intended to have shufflers so Skinn0 represents a negative iteration.

Competitions

December In House Competition 2023

• Results: 4 - 2
  • Bracket Style: Double Elimination
    • Forfeit Win vs Brian
    • JD Loss vs Anomali
      • Shell lost contact with wheel as top plate peeled up, plastite holes wore out
    • KO Win vs Insaniti
    • JD Win vs Scampii
    • JD Win vs Anomali(i)
    • JD Loss vs Bar-Bus-i
      • Lost balance as tooth mounts started to fall off

Version

Skinn0

Created by: Jacques Wang

Drive Motors	Custom "Dartbox" motors using Botkits gearboxes and MTB Rhino motors
Drive Motor Controllers	Scorpion Mini Dual Brushed ESC
Weapon Motor	Flash Hobby d2836 880kv
Weapon Motor Controllers	Turnigy multistar 41a ESC
Receiver	2A mini Reciever for Flysky Controller 4Ch
Remote Control	Flysky FS-i6x 6-10Ch 2.4GHz RC transmitter
Battery	Turnigy 4s 850mah
Wheels	TPU Wheels on Fingertech Snap Hubs, coated with hot glue

Design Summary

The chassis consists of a TPU clamshell with an aluminum top and bottom plate. The shell is mostly printed in TPU with an aluminum top plate for contact with the wheel and AR teeth.

Problems

• Weapon
  • Tooth mounts need more material
  • 1/8 in aluminum top plate prone to bending
  • Rubber wheel wore down relatively quickly, could have been due to the sandblasted top plate
  • Would lose contact with wheel, need supporting roller on other side
• Chassis
  • The wood screws were convenient at the time but opening up the chassis was kind of annoying
  • The motor mounts would heat up enough to melt through the TPU holding it in
• Drive
  • 2 Wheel drive centered on the middle of the robot is very wobbly and hard to control

Not Problems

• Weapon
  • Spinup was surprisingly good considering the relatively small motor
  • Tooth design was nice and sharp
• Chassis
  • Clamshell design was very effective considering the little manufacturing effort and parts required

Gallery

Skinn0