Difference between revisions of "Insaniti"
Jump to navigation
Jump to search
(→Issues) |
|||
| Line 63: | Line 63: | ||
*Belt would easily slipped off due to no tension | *Belt would easily slipped off due to no tension | ||
*Weapon motor did not adjustable positioning | *Weapon motor did not adjustable positioning | ||
| − | + | **The groove on the pulley was not deep enough | |
*Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes | *Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes | ||
*Not very maneuverable | *Not very maneuverable | ||
| − | + | **Too friction by the aluminum stand | |
***Not enough traction from the foam wheel | ***Not enough traction from the foam wheel | ||
| − | + | **Not enough drive motor power | |
| − | + | **Back wheel drive meant imprecise forward movement(more testing) | |
| − | + | **Center of gravity not being on wheel | |
Revision as of 20:17, 24 February 2022
| Insaniti | |
|---|---|
| |
| Year Of Creation | 2021-2022 |
| Versions | |
| Current Version | V 1.0 |
| Update Year | 2021-2022 |
| Wins/Losses | 0/2 |
| Information and Statistics | |
| Weight Class | Beetleweight |
| Weapon Class | Vertical Disk |
| Combined Wins/Losses | 0/2 |
| Weapon Speed | Estimated 7000 RPM |
| Other | NA |
Insaniti is a beetleweight robot designed, machined, and assembled during the 2021-22 schoolyear. It competed in the 2022 Motorama Robot Combat event. Insaniti is a two-wheeled box-shaped robot armed with a large vertically spinning disk weighing approximately 2.8 pounds. This guide will evaluate design considerations and their consequences.
Competitions
Motorama 2022
- Results:
- Bracket Style: Double Elimination
- Loss versus Mombot
- Loss versus Carrotz
- Electronics issues due to faulty switch. Eliminated due to lack of movement after entering the Battle Box.
- Grudge Matches:
- Loss versus Singulariti (Video Link:)
- Bracket Style: Double Elimination
Design Overview
Chassis
Issues
- There was a possibility of being flipped into a diagonal where the wheels could not move
- Did not have clearance for inverted mode
- Switch was stripped due to being in a awkward position and supported by only wires
- Belt would easily slipped off due to no tension
- Weapon motor did not adjustable positioning
- The groove on the pulley was not deep enough
- Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes
- Not very maneuverable
- Too friction by the aluminum stand
- Not enough traction from the foam wheel
- Not enough drive motor power
- Back wheel drive meant imprecise forward movement(more testing)
- Center of gravity not being on wheel
- Too friction by the aluminum stand
