Difference between revisions of "Insaniti"
Jump to navigation
Jump to search
(→Insaniti V 1.0) |
(→Insaniti V 1.0) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 50: | Line 50: | ||
=Version= | =Version= | ||
| − | ==Insaniti | + | ==Insaniti V1.0== |
Created by: <span style="color: rgb(0, 0, 0); font-family: sans-serif; font-size: 12.6999998092651px; line-height: 20.7999992370605px;"> | Created by: <span style="color: rgb(0, 0, 0); font-family: sans-serif; font-size: 12.6999998092651px; line-height: 20.7999992370605px;"> | ||
| Line 62: | Line 62: | ||
|- | |- | ||
| Weapon Motor | | Weapon Motor | ||
| − | + | | Power 10 Brushless Outrunner Motor, 1100Kv | |
|- | |- | ||
| Weapon Motor Controllers | | Weapon Motor Controllers | ||
Latest revision as of 22:05, 25 February 2022
| Insaniti | |
|---|---|
| |
| Year Of Creation | 2021-2022 |
| Versions | |
| Current Version | 1.0 |
| Update Year | 2021-2022 |
| Wins/Losses | 0/2 |
| Information and Statistics | |
| Weight Class | Beetleweight |
| Weapon Class | Vertical Disk |
| Combined Wins/Losses | 0/2 |
| Weapon Speed | Estimated 7000 RPM |
Insaniti is a beetleweight robot designed, machined, and assembled during the 2021-22 schoolyear. It competed in the 2022 Motorama Robot Combat event. Insaniti is a two-wheeled box-shaped robot armed with a large vertically spinning disk weighing approximately 2.8 pounds. This guide will evaluate design considerations and their consequences.
Contents
Competitions
Motorama 2022
- Results: 0-2
- Bracket Style: Double Elimination
- Loss vs Mombot
- Loss vs Carrotz
- Electronics issues due to faulty switch. Eliminated due to lack of movement after entering the Battle Box.
- Grudge Matches
- Loss vs Singulariti (Video Link: https://youtu.be/TnmIEZADxlk)
- Bracket Style: Double Elimination
Version
Insaniti V1.0
Created by:
| Drive Motors | |
| Drive Motor Controllers | |
| Weapon Motor | Power 10 Brushless Outrunner Motor, 1100Kv |
| Weapon Motor Controllers | |
| Receiver | |
| Remote Control | |
| Battery |
Design Summary
- Weapon
- Vertical Spinner
- Chasis
- Long prismatic chassis with slots for weight savings.
- The side plates were 3/16” thick Aluminum plates while the front, internal, back, and base plates were ⅛” thick Aluminum plates.
- The top plate was ⅛” thick HDPE.
- Lots of slot-shaped weight savings were implemented.
- The robot features an invertibility stand extended upward from both left and right internal plates.
- All plates are attached with 4-40 screws.
- Extended material from side plates to prevent the front plate from being dragged along the floor.
- Drive
- Two-wheel drive
- Default 3-lb drive motor electronics and assembly
- 3” diameter wheels
Positives
- The chassis is simplistic and does not contain complex geometry, resulting in an easier manufacturing/machining process.
- The extensions from the internal side plates permit the robot to be mobile when flipped.
- The HDPE top plate and ⅛” thick Aluminum base plate provided adequate protection, inflicting little-to-no damage despite being hit by Chonkii and Mauri.
Issues
- There was a possibility of being flipped into a diagonal where the wheels could not move
- Did not have clearance for inverted mode
- Switch was stripped due to being in an awkward position and supported by only wires
- Belt would easily slip off due to no tension
- Weapon motor did not adjustable positioning
- The groove on the pulley was not deep enough
- Weapon motor did not adjustable positioning
- Vertical weight savings being aligned with puzzle fit tap holes meant the armor was weak at those tap holes
- Not very maneuverable
- Too friction by the aluminum stand
- Not enough traction from the foam wheel
- Not enough drive motor power
- Back wheel drive meant imprecise forward movement(more testing)
- Center of gravity not being on wheel
- Too friction by the aluminum stand
