Difference between revisions of "2016 Electrical OSMC"
Jump to navigation
Jump to search
(→Connections: 10-pin Header (logic interface)) (Tag: Visual edit) |
Joldenburg6 (talk | contribs) m (Categorize) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
== OSMC (Open-Source Motor Controller) == | == OSMC (Open-Source Motor Controller) == | ||
| − | [[File:Osmc.jpg|thumb|308x308px|OSMC with fan for | + | [[File:Osmc.jpg|thumb|308x308px|OSMC with fan for heat dissipation. <ref name=":0">http://www.robotpower.com/products/osmc_info.html</ref>]] |
[[File:H-bridge.png|thumb|271x271px|H-bridge motor controller. <ref>http://www.modularcircuits.com/blog/articles/h-bridge-secrets/h-bridges-the-basics/</ref>]] | [[File:H-bridge.png|thumb|271x271px|H-bridge motor controller. <ref>http://www.modularcircuits.com/blog/articles/h-bridge-secrets/h-bridges-the-basics/</ref>]] | ||
The OSMC module allows interfacing with the motors using PWM to control speed and digital logic to control direction. Two are used for each drive wheel. Essentially, the OSMC is an H-bridge motor controller with additional functionalities, such as high power operation. | The OSMC module allows interfacing with the motors using PWM to control speed and digital logic to control direction. Two are used for each drive wheel. Essentially, the OSMC is an H-bridge motor controller with additional functionalities, such as high power operation. | ||
| Line 156: | Line 156: | ||
|24V | |24V | ||
|Motor Fuses | |Motor Fuses | ||
| − | |||
| − | |||
| − | |||
| − | |||
|} | |} | ||
| Line 179: | Line 175: | ||
* [[2016 Electrical Light Shield|Light Shield]] | * [[2016 Electrical Light Shield|Light Shield]] | ||
| − | + | [[Category:IGVC]][[Category:2016-2017]] | |
Latest revision as of 20:58, 13 June 2018
Contents
OSMC (Open-Source Motor Controller)
OSMC with fan for heat dissipation. <ref name=":0">http://www.robotpower.com/products/osmc_info.html</ref>
H-bridge motor controller. <ref>http://www.modularcircuits.com/blog/articles/h-bridge-secrets/h-bridges-the-basics/</ref>
The OSMC module allows interfacing with the motors using PWM to control speed and digital logic to control direction. Two are used for each drive wheel. Essentially, the OSMC is an H-bridge motor controller with additional functionalities, such as high power operation.
Connections: 10-pin Header (logic interface)
|
Pin |
Function |
Signal Type |
Connected Device |
|
1 |
Power |
DC (12V) (VCC) |
Motor Shield |
|
2 |
Power |
DC (12V) |
Motor Shield |
|
3 |
|||
|
4 |
Disable |
Logic (input) |
Motor Shield |
|
5 |
AHI (A-side high input) |
VCC (logic high) |
Motor Shield |
|
6 |
ALI |
PWM (input) |
Motor Shield |
|
7 |
BHI |
VCC (logic high) |
Motor Shield |
|
8 |
BLI |
PWM (input) |
Motor Shield |
|
9 |
Ground (GND) |
Ground |
Motor Shield |
|
10 |
Ground (GND) |
Ground |
Motor Shield |
Other Connections
| Ground | GND | Ground bar |
| Power | 24V | Motor Fuses |
Datasheet
Osmc data table. <ref>http://www.robotpower.com/products/osmc_info.html</ref>
Notes
Full Schematic
Full Schematic PDF<ref name=":0" />
