Difference between revisions of "2016 Electrical OSMC"
Jump to navigation
Jump to search
(→Full Schematic) (Tag: Visual edit) |
(→Connections: 10-pin Header (logic interface)) (Tag: Visual edit) |
||
Line 8: | Line 8: | ||
| | | | ||
− | Pin | + | '''Pin''' |
| | | | ||
− | Function | + | '''Function''' |
| | | | ||
− | Signal Type | + | '''Signal Type''' |
| | | | ||
− | Connected Device | + | '''Connected Device''' |
|- | |- | ||
Line 30: | Line 30: | ||
| | | | ||
− | Motor | + | Motor Shield |
|- | |- | ||
Line 43: | Line 43: | ||
| | | | ||
− | Motor | + | Motor Shield |
|- | |- | ||
Line 131: | Line 131: | ||
| | | | ||
− | + | Motor Shield | |
|- | |- | ||
Line 144: | Line 144: | ||
| | | | ||
− | + | Motor Shield | |
+ | |} | ||
+ | Other Connections | ||
+ | {| class="wikitable" | ||
+ | |Ground | ||
+ | |GND | ||
+ | |Ground bar | ||
+ | |- | ||
+ | |Power | ||
+ | |24V | ||
+ | |Motor Fuses | ||
+ | |- | ||
+ | | | ||
+ | | | ||
+ | | | ||
|} | |} | ||
Revision as of 12:42, 13 November 2016
Contents
OSMC (Open-Source Motor Controller)
The OSMC module allows interfacing with the motors using PWM to control speed and digital logic to control direction. Two are used for each drive wheel. Essentially, the OSMC is an H-bridge motor controller with additional functionalities, such as high power operation.
Connections: 10-pin Header (logic interface)
Pin |
Function |
Signal Type |
Connected Device |
1 |
Power |
DC (12V) (VCC) |
Motor Shield |
2 |
Power |
DC (12V) |
Motor Shield |
3 |
|||
4 |
Disable |
Logic (input) |
Motor Shield |
5 |
AHI (A-side high input) |
VCC (logic high) |
Motor Shield |
6 |
ALI |
PWM (input) |
Motor Shield |
7 |
BHI |
VCC (logic high) |
Motor Shield |
8 |
BLI |
PWM (input) |
Motor Shield |
9 |
Ground (GND) |
Ground |
Motor Shield |
10 |
Ground (GND) |
Ground |
Motor Shield |
Other Connections
Ground | GND | Ground bar |
Power | 24V | Motor Fuses |
Datasheet
Notes
Full Schematic
Full Schematic PDF<ref name=":0" />