Difference between revisions of "Spinni-Boi"
Jump to navigation
Jump to search
(→Good aspects) |
(→Problems) |
||
| Line 84: | Line 84: | ||
*Standoffs for our flywheels were not made to spec (too short -> too much friction) | *Standoffs for our flywheels were not made to spec (too short -> too much friction) | ||
*Weapon drive wheel constraints were not included in the design, so we had interference issues | *Weapon drive wheel constraints were not included in the design, so we had interference issues | ||
| − | *Because of the added friction, weapon spin up was very finicky | + | *Because of the added friction, weapon spin-up was very finicky |
| + | *Weapon tooth was replaced with a bolt, which was too small to protect the gap between ring and plates | ||
==== Good aspects ==== | ==== Good aspects ==== | ||
Revision as of 20:17, 28 February 2020
| Spinni-Boi | |
|---|---|
| Year of Creation | 2019-2020 |
| Versions | |
| Current Version | 1.0 |
| Update Year | 2019-2020 |
| Wins/Losses | 1/2 |
| Information and Statistics | |
| Weight Class | BeetleWeight |
| Weapon Class | Ring Spinner |
| Combined Wins/Losses | 1/2 |
| Weapon Speed | (RPM) |
(Replace this text with an overall introduction of your robot's design, name, features, ect)
Contents
Competitions
Motorama 2020
- Results:
- Bracket Style:
- [(Video Link) (result) vs (opponent)]
- (notes)
- (observations))
- [(Video Link) (result) vs (opponent)]
- Bracket Style:
Version
Spinni-Boi V1.0
Created by: (Names of Builders/Group Members of aforementioned version of bot)
| Drive Motors | (Drive Motor Name) |
| Drive Motor Controllers | (Drive Motor Controller Name) |
| Weapon Motor | PROPDRIVE v2 2836 2700KV Brushless Outrunner |
| Weapon Motor Controllers | (Weapon Motor Controller Name) |
| Receiver | Hobby King 2.4Ghz Receiver 6Ch V2 |
| Remote Control | Hobby King 2.4Ghz 6Ch Tx and Rx V2 |
| Battery | (Battery Name) |
| (OTHER:) |
Problems
- Parts of robot stuck out past the ring, those caught on opponents weapons
- Standoffs for our flywheels were not made to spec (too short -> too much friction)
- Weapon drive wheel constraints were not included in the design, so we had interference issues
- Because of the added friction, weapon spin-up was very finicky
- Weapon tooth was replaced with a bolt, which was too small to protect the gap between ring and plates
Good aspects
- Drive was very solid (mechanically)
- Only the top plate usually got damaged, and was easily repaired
Changes/Improvements
- (List of suggested improvements/changes, 1 per bullet point)
Notes:
(random joke, optional) The spinniest of bois. The most Boi of fidget spinners.
(Naming inspiration, optional)
(Names of original builders)
