Difference between revisions of "Anarchi"

From RoboJackets Wiki
Jump to navigation Jump to search
(Introduction)
Line 80: Line 80:
 
=== [[Motorama_2022|Motorama 2022]] ===
 
=== [[Motorama_2022|Motorama 2022]] ===
  
*Results: 2-2
+
*Results: 1-2
 
**Bracket Style: Double Elimination
 
**Bracket Style: Double Elimination
***[Chonkii (winner) V.S. Marathon (loser): YouTube Link]
+
***[Anarchi (loser) V.S. Wedgeham (loser): YouTube Link]
**** This match saw Chonkii head to head with a
+
****  
**** Chonkii got a bunch of good hits in, sparks flew multiple times.
+
****
**** Shove, wall , stay
+
****   
**** More Description
+
****  
***[Chonkii (loser) V.S. Yahoo (winner): YouTube Link]
+
***[Anarchi (winner) V.S. Dragon Fruit (loser): YouTube Link]
**** turtle
+
****  
**** More Description
+
****  
***[Chonkii (winner) V.S. Pigeon (loser): YouTube Link]
+
***[Anarchi (loser) V.S. Crippling Depression (winner): YouTube Link]
**** Trick shots, smacked off titanium front plate
+
****  
**** More Description
+
****  
***[Chonkii (loser) V.S. Lockout (winner): YouTube Link]
 
**** Forfeit (5 thou)
 
**** More Description
 
**Robojacket Rumble
 
***[Chonkii vs Everyone: YouTube Link]
 
**** Description
 
**** More Description
 
  
 
==== Issues ====
 
==== Issues ====

Revision as of 01:11, 17 May 2022

Introduction

Members:

  • Dylan Adriano (Bot Lead)
  • Brian Naing
  • Cade Tyler
  • Jackson Isenberg
  • Lucas Luwa

Drive System

Foot Profile

Weapon System

Design Considerations

Shell Design

Shell was milled out of a 250 lb block of A36 steel. It took forever but was very effective in absorbing damage.


Pros:


Cons:

  • Expensive, had to get Speed Machine to have them use a larger machine to mill the shell out.
  • One piece, parts that got damaged on shell were not replaceable - dents needed to be pressed or hammered out.

Weapon Shaft Interface

A tapered roller bearing fits into a housing that is attached to the top of the shell.

Bearing Section View.PNG

Weapon-Drive Mechanism

    • Inspired by Hyperpolarized, it was later decided to drive the weapon by using a single driven wheel at the top of the bot, with rollers along the surface to give additional support. A central shaft was used as a dead axle support.

Chassis System

File:ChonkiiChassis.png

  • The chassis mostly consisted of aluminum, featuring of a ¼” top and side plates and ⅛” bottom plate.
  • The front and back plates were made of HDPE, which bent to form Chonkii’s robustly round shape.
  • The chassis had multiple rollers spaced out along its top, giving additional support to the shell track above.
  • The central dead axle was constrained by two blocks, mounted to both the top and bottom plates. However, it was later determined that a single longer block with a key would constrain the shaft better than the two block system.
    • While drilling through the blocks into the shaft, a drill bit melted inside, acting as a makeshift pin (that was instantly destroyed in competition).

Electronics

Drive Motors Turnigy Aerodrive SK3 - 5055-280KV Brushless Outrunner Motor


Drive Motor Controllers Flipsky Dual FSESC6.6 Based upon VESC6 with Aluminum Heatsink Mini Size (whatever apachi used)
Weapon Motor Scorpion SII-4035-250KV
Weapon Motor Controllers Tribunus 06-120A (6S) Brushless ESC
Receiver Hobby King 2.4Ghz Receiver 6Ch V2
Remote Control Hobby King 2.4Ghz 6Ch Tx and Rx V2
Battery Turnigy Heavy Duty 5000mAh 6S 60C LiPo Pack w/XT90
Turnigy Graphene Panther 3000mAh 3S 75C Battery Pack w/XT90

Competitions

Motorama 2022

  • Results: 1-2
    • Bracket Style: Double Elimination
      • [Anarchi (loser) V.S. Wedgeham (loser): YouTube Link]
      • [Anarchi (winner) V.S. Dragon Fruit (loser): YouTube Link]
      • [Anarchi (loser) V.S. Crippling Depression (winner): YouTube Link]

Issues

  • Stuff
  • Other Stuff

Changes to make

  • Stuff
  • Other Stuff

Trivia

  • The Vectrax was rendered inoperable twice by Chonki members (mainly Brian) during its construction.