Daddi
| Daddi | |
|---|---|
 | |
| Year Of Creation | 2018-2019 |
| Versions | |
| Current Version | 1.0 |
| Wins/Losses | 1/2 |
| Information and Statistics | |
| Weight Class | BeetleWeight |
| Weapon Class | Horizontal Bar Spinner |
| Combined Wins/Losses | 1/2 |
Daddi is a horizontal bar spinner with ABSOLUTELY nothing in common with Chewii. The chassis is made up of a single top and bottom plate as well as three aluminum side plates. The front plate that protected the contents of our bot from our opponents (and ourselves) was made up of a plastic tab that fit in with slits. The weapon is currently a steel 'infinity' design, but was at one point a single-headed hammer with a dense counterweight. We had a ton of mentors throughout the manufacturing phase, but Rahul was the OG.
Contents
Competitions
Motorama 2019
- Results: 1/2
- Bracket Style: Double Elimination
- ( https://photos.app.goo.gl/XjANM3rZzaa8Z3EE6 ) Loss vs Nitro Hornet
- We got propped against the corner and drive had issues getting us out of that situation. Weapon subsystem worked optimally.
- ( https://photos.app.goo.gl/MHje1Nkwhv1Thiax8 ) Win vs Unnamed Undercutter
- This win was a battle of attrition. We started with a functioning weapon but only one functioning wheel. The opponent started with no weapon and a weak drive. We got a judges victory because we were able to hobble over and smack them up a bit.
- ( https://photos.app.goo.gl/XjANM3rZzaa8Z3EE6 ) Loss vs Deadite
- We both got some good hits in, but it was ultimately down to losing a wheel and not being able to spin up the one wheel we did have.
- ( https://photos.app.goo.gl/XjANM3rZzaa8Z3EE6 ) Loss vs Nitro Hornet
- Bracket Style: Double Elimination
Versions
Daddi
Created by: Paul Matesevac, Nikolay Tranakiev, Keaton Sadoski, Preston Alsup, Cole Carrow, Emily Endozo, Erik Heitshusen
| Drive Motors | DYS BE1806 2300KV Motors |
| Drive Motor Gearboxes | KITBOTS 1000rpm Gearmotor Gearboxes |
| Drive Motor Controllers | DYS 20A Micro Opto Multi-rotor ESC |
| Weapon Motor | PROPDRIVE v2 2836 2300KV Brushless Outrunner Motor |
| Weapon Motor Controllers | HobbyKing 50A ESC 4A UBEC |
| Receiver | Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2 |
| Remote Control | Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2 |
| Battery | Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack |
Problems
- Drive motors would cut out randomly and both never worked at the same time
- There was not enough room for the wires to be neatly organized and they sometimes caused the drive motors to stall
- The belt would pull horizontally on the weapon causing it to dig into the bottom plate when not tightened completely
- Side armor was ripped off too easily and provided little protection
- Robot got stuck in corner of arena at one point and could not push itself off with the weapon
- Weapon motor became overloaded and started smoking
Good aspects
- Weapon had a relatively long range and powerful hit
- Structure was resilient to hits
Changes/Improvements
- Change the chassis dimensions to accommodate more interior room for electronics
- Secure all fasteners related to drive motors to guarantee consistent performance
- Note to all future Daddi derivatives You will need more space inside the bot. Hands-down no questions. Not a lot of space but we struggled getting everything in the bot without wrapping wires around our weapon motor
Notes:
This bot's name is Daddi, not Dadi. Don't let anyone tell you different
The name came from the ultimate Daddy, our original mentor Rahul Balamurali
Paul Matesevac, Nikolay Tranakiev, Keaton Sadoski, Preston Alsup, Cole Carrow, Emily Endozo, Erik Heitshusen
