Daddi

Daddi
Year Of Creation	2018-2019
Versions
Current Version	1.0
Wins/Losses	1/2
Information and Statistics
Weight Class	BeetleWeight
Weapon Class	Horizontal Bar Spinner
Combined Wins/Losses	1/2

(Replace this text with an overall introduction of your robot's design, name, features, ect) Test

Competitions

Motorama 2019

• Results: 1/2
  • Bracket Style: Double Elimination
    • [(Video Link) (result) vs (opponent)]
      • (notes)
      • (observations))
    • [(Video Link) (result) vs (opponent)]
      • (notes)
      • (observations))
    • [(Video Link) (result) vs (opponent)]
      • (notes)
      • (observations))

Versions

Daddi

Created by: (Names of Builders/Group Members of aforementioned version of bot)

Drive Motors	DYS BE1806 2300KV Motors
Drive Motor Gearboxes	KITBOTS 1000rpm Gearmotor Gearboxes
Drive Motor Controllers	DYS 20A Micro Opto Multi-rotor ESC
Weapon Motor	(Weapon Motor Name)
Weapon Motor Controllers	(Weapon Motor Controller Name)
Receiver	Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2
Remote Control	Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2
Battery	Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack

Problems

• Drive motors would cut out randomly and both never worked at the same time
• There was not enough room for the wires to be neatly organized and they sometimes caused the drive motors to stall
• The belt would pull horizontally on the weapon causing it to dig into the bottom plate when not tightened completely
• Side armor was ripped off too easily and provided little protection
• Robot got stuck in corner of arena at one point and could not push itself off with the weapon
• Weapon motor became overloaded and started smoking

Good aspects

• Weapon had a relatively long range and powerful hit
• Structure was resilient to hits

Changes/Improvements

• (List of suggested improvements/changes, 1 per bullet point)

Notes:

(random joke, optional)

(Naming inspiration, optional)

(Names of original builders)