Wasabi

From RoboJackets Wiki
Revision as of 18:45, 4 April 2024 by Jreingold3 (talk | contribs)
Jump to navigation Jump to search
Wasabi
Wasabi
Year of Creation 2023-2024
Versions
Current Version 1.0
Update Year 2023-2024
Wins/Losses 1/1
Information and Statistics
Weight Class BeetleWeight
Weapon Class Horizontal Undercutter with three washers
Combined Wins/Losses 1/1
Weapon Speed 9300

This is Wasabi, built by Summer Reese, Josh Reingold, Alexander King, Vincent Nienhusser


Competitions

UGA Smash 2024

  • Results:1/1
    • Bracket Style: Single Elimination
      • Win vs Automation
        • Both bots' weapons failed within <15 seconds
      • Loss vs Phil
        • was able to get a multiple good hits, incapacitated Phil's weapon
        • Phil won due to aggression and control categories.
    • Grudge Matches (At SCC)
      • 3-way match vs Bipolariti and Barbi
        • Barbi won
        • Bipolariti caught on fire
        • belt slipped off pulley resulting in loss

Version

Wasabi V1.0

Created by: Summer Reese, Josh Reingold, Alexander King

Drive Motors Dartbox Viper [V2]
Drive Motor Controllers Budget 15A Dual Brushed ESC
Weapon Motor FLASH HOBBY D2836 Brushless Outrunner Motor 2~4S (800KV)
Weapon Motor Controllers Flycolor Francy 2 BLHeli_32 3-6S Dshot ESC
Receiver Hobby King 2.4Ghz Receiver 6Ch V2
Remote Control Hobby King 2.4Ghz 6Ch Tx and Rx V2
Battery GAONENG GNB 930MAH 11.1V 3S 120C LIPO
Armor 3D printed TPU
(OTHER:)

Problems (Absolutely no problems. Except these ones.)

  • Poor ground clearance (Ground was in our way)
  • Half pound overweight (Freshman 15)
  • Hard to find right belt length
  • TPU armor interfered with hub caps
  • Almost caught on fire (but didn't much). Make sure to wrap exposed electronic metal in electrical tape
  • Not enough washers or zinc nut

Changes/Improvements

  • Created shelf to raise weapon while maintaining chassis room for electronics to improve ground clearance.
  • Hammer. And holes. Lots of holes. SO MANY HOLES. And filling. MANY FILLINGS. Also changed top plate from aluminium to nylonX.
  • Scissors and weld. Found right belt length and got timing belt
  • Changed design to create holes for hub caps in armor
  • Tape
  • Washers are magic and should be worshipped

Good aspects (Sick looking bot)

  • TPU armor
  • Invertible
  • Shelf worked well
  • Foam wheels
  • Hot glued nut
  • Great drive


Notes:

Best design review quote: "You guys shouldn't have that much of a moment. You should be fine."

Name Inspiration: The condiment wasabi.

Wasabi is superior!