Spinni-Boi

Spinni-Boi
(Highlight text)
Year of Creation	2019-2020
Versions
Current Version	1.0
Update Year	2019-2020
Wins/Losses	1/2
Information and Statistics
Weight Class	BeetleWeight
Weapon Class	Ring Spinner
Combined Wins/Losses	1/2
Weapon Speed	(RPM)

(Replace this text with an overall introduction of your robot's design, name, features, ect)

Competitions

Motorama 2020

• Results:
  • Bracket Style:
    • [(Video Link) (result) vs (opponent)]
      • (notes)
      • (observations))

Version

Spinni-Boi V1.0

Created by: (Names of Builders/Group Members of aforementioned version of bot)

Drive Motors	(Drive Motor Name)
Drive Motor Controllers	(Drive Motor Controller Name)
Weapon Motor	PROPDRIVE v2 2836 2700KV Brushless Outrunner
Weapon Motor Controllers	(Weapon Motor Controller Name)
Receiver	Hobby King 2.4Ghz Receiver 6Ch V2
Remote Control	Hobby King 2.4Ghz 6Ch Tx and Rx V2
Battery	(Battery Name)
(OTHER:)

Problems

• Parts of robot stuck out past the ring, those caught on opponents weapons
• Standoffs for our flywheels were not made to spec (too short -> too much friction)
• Weapon drive wheel constraints were not included in the design, so we had interference issues
• Because of the added friction, weapon spin-up was very finicky
• Weapon tooth was replaced with a bolt, which was too small to protect the gap between ring and plates

Good aspects

• Drive was very solid (mechanically)
• Only the top plate usually got damaged, and was easily repaired

Changes/Improvements

• (List of suggested improvements/changes, 1 per bullet point)

Notes:

(random joke, optional) The spinniest of bois. The most Boi of fidget spinners.

(Naming inspiration, optional)

(Names of original builders)