Difference between revisions of "Wasabi"
Jump to navigation
Jump to search
(→Grunge Matches (At SCC) =) |
(→Grunge Matches (At SCC)) |
||
| Line 49: | Line 49: | ||
****Phil won due to aggression and control categories. | ****Phil won due to aggression and control categories. | ||
| − | == [[Grunge Matches (At SCC)]] == | + | === [[Grunge Matches (At SCC)]] === |
*3-way match vs Bipolariti and Barbi | *3-way match vs Bipolariti and Barbi | ||
**Barbi won | **Barbi won | ||
Revision as of 18:59, 5 April 2024
| Wasabi | |
|---|---|
 | |
| Year of Creation | 2023-2024 |
| Versions | |
| Current Version | 1.0 |
| Update Year | 2023-2024 |
| Wins/Losses | 1/1 |
| Information and Statistics | |
| Weight Class | BeetleWeight |
| Weapon Class | Horizontal Undercutter |
| Combined Wins/Losses | 1/1 |
| Weapon Speed | 9300 |
This is Wasabi, built by Summer Reese, Josh Reingold, Alexander King, Vincent Nienhusser
Contents
Competitions
UGA Spring Smash 2024
- Results:1/1
- Bracket Style: Single Elimination
- Win vs Automation
- Both bots' weapons failed within 15 seconds
- Loss vs Phil
- was able to get a multiple good hits, incapacitated Phil's weapon
- Phil won due to aggression and control categories.
- Win vs Automation
- Bracket Style: Single Elimination
Grunge Matches (At SCC)
- 3-way match vs Bipolariti and Barbi
- Barbi won
- Bipolariti caught on fire
- Belt slipped off pulley resulting in loss
Version
Wasabi V1.0
Created by: Summer Reese, Josh Reingold, Alexander King, Vincent Nienhusser
| Drive Motors | Dartbox Viper [V2] |
| Drive Motor Controllers | Budget 15A Dual Brushed ESC |
| Weapon Motor | FLASH HOBBY D2836 Brushless Outrunner Motor 2~4S (800KV) |
| Weapon Motor Controllers | Flycolor Francy 2 BLHeli_32 3-6S Dshot ESC |
| Receiver | FlySky FS-I6 2.4GHz 6-Channel Receiver |
| Remote Control | FlySky FS-i6-M2 2.4GHz 6-Channel Transmitter |
| Battery | GAONENG GNB 930MAH 11.1V 3S 120C LIPO |
| Armor | 3D printed TPU |
| (OTHER:) |
Problems (Absolutely no problems. Except these ones.)
- Poor ground clearance (Ground was in our way)
- Half pound overweight (Freshman 15)
- Hard to find right belt length
- TPU armor interfered with hub caps
- Almost caught on fire (but didn't much). Make sure to wrap exposed electronic metal in electrical tape
- Not enough washers or zinc nut
Changes/Improvements
- Created shelf to raise weapon while maintaining chassis room for electronics to improve ground clearance.
- Hammer. And holes. Lots of holes. SO MANY HOLES. And filing. MANY FILINGS. Also changed top plate from aluminum to NylonX.
- Cut and welded a polycord belt to start and then found the right belt length and got the correct timing belt.
- Changed design to create holes for hub caps in armor
- Tape
- Washers are magic and should be worshipped
Good aspects (Sick looking bot)
- TPU armor
- Invertible
- Shelf worked well
- Foam wheels
- Hot glued nut
- Great drive
Notes:
Name Inspiration: The condiment wasabi.
Wasabi is superior!
