Difference between revisions of "Anarchi"

From RoboJackets Wiki
Jump to navigation Jump to search
Line 59: Line 59:
 
|-
 
|-
 
| Weapon Motor
 
| Weapon Motor
| Horizontal: Scorpion SII-4035-250KV
+
| Horizontal: Scorpion SII-4035-250KV, Drum: HKIV-4025-1100KV
| Drum: HKIV-4025-1100KV
 
 
|-
 
|-
 
| Weapon Motor Controllers
 
| Weapon Motor Controllers

Revision as of 00:14, 17 May 2022

Introduction

Members:

  • Dylan Adriano (Bot Lead)
  • Brian Naing
  • Cade Tyler
  • Jackson Isenberg
  • Lucas Luwa

Drive System

Foot Profile

Weapon System

Design Considerations

Shell Design

Shell was milled out of a 250 lb block of A36 steel. It took forever but was very effective in absorbing damage.


Pros:


Cons:

  • Expensive, had to get Speed Machine to have them use a larger machine to mill the shell out.
  • One piece, parts that got damaged on shell were not replaceable - dents needed to be pressed or hammered out.

Weapon Shaft Interface

A tapered roller bearing fits into a housing that is attached to the top of the shell.

Bearing Section View.PNG

Weapon-Drive Mechanism

    • Inspired by Hyperpolarized, it was later decided to drive the weapon by using a single driven wheel at the top of the bot, with rollers along the surface to give additional support. A central shaft was used as a dead axle support.

Chassis System

File:ChonkiiChassis.png

  • The chassis mostly consisted of aluminum, featuring of a ¼” top and side plates and ⅛” bottom plate.
  • The front and back plates were made of HDPE, which bent to form Chonkii’s robustly round shape.
  • The chassis had multiple rollers spaced out along its top, giving additional support to the shell track above.
  • The central dead axle was constrained by two blocks, mounted to both the top and bottom plates. However, it was later determined that a single longer block with a key would constrain the shaft better than the two block system.
    • While drilling through the blocks into the shaft, a drill bit melted inside, acting as a makeshift pin (that was instantly destroyed in competition).

Electronics

Drive Motors Turnigy Aerodrive SK3 - 5055-280KV Brushless Outrunner Motor


Drive Motor Controllers Sabertooth Dual 25A 6V-24V Regenerative Motor Driver
Weapon Motor Horizontal: Scorpion SII-4035-250KV, Drum: HKIV-4025-1100KV
Weapon Motor Controllers HobbyWing Platinum PRO V4 120A ESC
Receiver Hobby King 2.4Ghz Receiver 6Ch V2
Remote Control Hobby King 2.4Ghz 6Ch Tx and Rx V2
Battery Zeee 22.2V 60C 4000mAh 6S Lipo Battery

Competitions

Motorama 2022

  • Results: 1-2
    • Bracket Style: Double Elimination
      • [Anarchi (loser) V.S. Wedgeham (loser): YouTube Link]
      • [Anarchi (winner) V.S. Dragon Fruit (loser): YouTube Link]
      • [Anarchi (loser) V.S. Crippling Depression (winner): YouTube Link]

Issues

  • Stuff
  • Other Stuff

Changes to make

  • Stuff
  • Other Stuff

Trivia

  • The Vectrax was rendered inoperable twice by Chonki members (mainly Brian) during its construction.