Difference between revisions of "Wasabi"
Jump to navigation
Jump to search
(→Wasabi V1.0) |
Jreingold3 (talk | contribs) |
||
| Line 91: | Line 91: | ||
|} | |} | ||
| − | ==== Problems ( | + | ==== Problems (Absolutely no problems. Except these ones.) ==== |
| − | * | + | *Poor ground clearance (Ground was in our way) |
| − | * | + | *Half pound overweight (Freshman 15) |
| − | * | + | *Hard to find right belt length |
| + | *TPU armor interfered with hub caps | ||
| + | *Almost caught on fire (but didn't much). Make sure to wrap exposed electronic metal in electrical tape | ||
| + | *Not enough washers or zinc nut | ||
| − | ==== Good aspects ==== | + | ==== Changes/Improvements ==== |
| + | |||
| + | *Created shelf to raise weapon while maintaining chassis room for electronics to improve ground clearance. | ||
| + | *Hammer. And holes. Lots of holes. SO MANY HOLES. And filling. MANY FILLINGS. Also changed top plate from aluminium to nylonX. | ||
| + | *Scissors and weld. Found right belt length and got timing belt | ||
| + | *Changed design to create holes for hub caps in armor | ||
| + | *Tape | ||
| + | *Washers are magic and should be worshipped | ||
| + | |||
| + | ==== Good aspects (Sick looking bot) ==== | ||
| − | * | + | *TPU armor |
| − | * | + | *Invertible |
| − | * | + | *Shelf worked well |
| − | * | + | *Foam wheels |
| + | *Hot glued nut | ||
| + | *Great drive | ||
| − | |||
| − | |||
| − | |||
== Notes: == | == Notes: == | ||
Revision as of 18:45, 4 April 2024
| Wasabi | |
|---|---|
 | |
| Year of Creation | 2023-2024 |
| Versions | |
| Current Version | 1.0 |
| Update Year | 2023-2024 |
| Wins/Losses | 1/1 |
| Information and Statistics | |
| Weight Class | BeetleWeight |
| Weapon Class | Horizontal Undercutter with three washers |
| Combined Wins/Losses | 1/1 |
| Weapon Speed | 9300 |
This is Wasabi, built by Summer Reese, Josh Reingold, Alexander King, Vincent Nienhusser
Contents
Competitions
UGA Smash 2024
- Results:1/1
- Bracket Style: Single Elimination
- Win vs Automation
- Both bots' weapons failed within <15 seconds
- Loss vs Phil
- was able to get a multiple good hits, incapacitated Phil's weapon
- Phil won due to aggression and control categories.
- Win vs Automation
- Grudge Matches (At SCC)
- 3-way match vs Bipolariti and Barbi
- Barbi won
- Bipolariti caught on fire
- belt slipped off pulley resulting in loss
- 3-way match vs Bipolariti and Barbi
- Bracket Style: Single Elimination
Version
Wasabi V1.0
Created by: Summer Reese, Josh Reingold, Alexander King
| Drive Motors | Dartbox Viper [V2] |
| Drive Motor Controllers | Budget 15A Dual Brushed ESC |
| Weapon Motor | FLASH HOBBY D2836 Brushless Outrunner Motor 2~4S (800KV) |
| Weapon Motor Controllers | Flycolor Francy 2 BLHeli_32 3-6S Dshot ESC |
| Receiver | Hobby King 2.4Ghz Receiver 6Ch V2 |
| Remote Control | Hobby King 2.4Ghz 6Ch Tx and Rx V2 |
| Battery | GAONENG GNB 930MAH 11.1V 3S 120C LIPO |
| Armor | 3D printed TPU |
| (OTHER:) |
Problems (Absolutely no problems. Except these ones.)
- Poor ground clearance (Ground was in our way)
- Half pound overweight (Freshman 15)
- Hard to find right belt length
- TPU armor interfered with hub caps
- Almost caught on fire (but didn't much). Make sure to wrap exposed electronic metal in electrical tape
- Not enough washers or zinc nut
Changes/Improvements
- Created shelf to raise weapon while maintaining chassis room for electronics to improve ground clearance.
- Hammer. And holes. Lots of holes. SO MANY HOLES. And filling. MANY FILLINGS. Also changed top plate from aluminium to nylonX.
- Scissors and weld. Found right belt length and got timing belt
- Changed design to create holes for hub caps in armor
- Tape
- Washers are magic and should be worshipped
Good aspects (Sick looking bot)
- TPU armor
- Invertible
- Shelf worked well
- Foam wheels
- Hot glued nut
- Great drive
Notes:
Best design review quote: "You guys shouldn't have that much of a moment. You should be fine."
Name Inspiration: The condiment wasabi.
Wasabi is superior!
