Difference between revisions of "Groovi"
Jump to navigation
Jump to search
(→Good aspects) |
(→Good Aspects) |
||
Line 108: | Line 108: | ||
**Paint job on armor went all over the arena, but at least the top and bottom survived! | **Paint job on armor went all over the arena, but at least the top and bottom survived! | ||
− | ==== Good | + | ==== Good Aspects ==== |
*Groovi - Motorama Edition | *Groovi - Motorama Edition |
Revision as of 19:08, 4 April 2019
Groovi | |
---|---|
Year Of Creation | 2018-2019 |
Versions | |
Current Version | 1.0 |
Wins/Losses | 0/2 |
Information and Statistics | |
Weight Class | BeetleWeight |
Weapon Class | Drum Spinner |
Combined Wins/Losses | 0/2 |
Welcome to GROOVI! This is a drum spinner 3lb robot, we finished it at 2am the night before motorama :)
Contents
Competitions
Motorama 2019
- Results: 0/2
- Bracket Style: Double Elimination
- Loss vs tHe liD
- (No. 1 Nemesis)
- (we don't talk about this match...we just got swallowed))
- Loss vs Deadly Princess
- (No. 2 Nemesis)
- (a beater bar, took a chunk out of our drum, one of our wheels was out for this match, Deadly Princess had a way better paint job :C))
- Loss vs tHe liD
- Bracket Style: Double Elimination
RoboJackets 20th Anniversary Competition
- Results: 2/4
- Bracket Style: Round Robin - Four per Pool
- [htpp:putwhenwegetthelink.com]
- (Qualifying Match 1)
- (Win due to forfeit against nonexistent opponent)
- (Qualifying Match 2)
- (Loss to Furi due to weapon motor not spinning up, drive train fully functional, but Furi got one hit in before his drum detached)
- (Qualifying Match 3)
- (Win over Doori by running into them at ramming speed and generally being aggressively annoying)
- (Playoffs Match 1)
- (Loss to Hypnotik, got torn apart by high schoolers but hey at least we had a better paint job this time, weapon wouldn't spin up and they trapped us in a corner :C)
- [htpp:putwhenwegetthelink.com]
- Bracket Style: Round Robin - Four per Pool
Versions
Groovi
Created by: (Names of Builders/Group Members of aforementioned version of bot)
Drive Motors | DYS BE1806 2300KV Motors |
Drive Motor Gearboxes | KITBOTS 1000rpm Gearmotor Gearboxes |
Drive Motor Controllers | DYS 20A Micro Opto Multi-rotor ESC |
Weapon Motor | (Turnigy 2836-3700) |
Weapon Motor Controllers | (Turnigy PLUSH-40A) |
Receiver | Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2 |
Remote Control | Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2 |
Battery | Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack |
Problems
- Groovi - Motorama Edition
- Nonfunctional drive motor
- Locktight issues/pin in the drive motor was too short
- Was barely enough room for electronics
- Some holes were too small
- Belt was too loose
- Groovii - RoboJackets 20th Anniversary Edition
- Belt was too tight, caused too much torque on the weapon motor and prevented its successful spinup
- Except for that one time in front of the judges after we heat-gunned it
- And promptly decided not to heat-gun it again before our playoffs match (big mistake)
- Except for that one time in front of the judges after we heat-gunned it
- Similar locktight issues to Motorama involving the pinion gear inside the drive motors
- Wheel kept falling off because of a warped hub
- Bearings were warped, which made it a lot harder for the drum to turn as smoothly
- Overweight by 0.04 lb
- Had to drill speed holes and eventually were forced to remove one of the middle steel teeth to avoid disqualification
- Paint job on armor went all over the arena, but at least the top and bottom survived!
- Belt was too tight, caused too much torque on the weapon motor and prevented its successful spinup
Good Aspects
- Groovi - Motorama Edition
- Drum was very solid
- Was underweight
- Armor was effective
- Used hella electrical tape to fix switch (was functional at Motorama)
- Groovii - RoboJackets 20th Anniversary Edition
- MYSTERY MACHINE MAKEOVER
- Got ALL the complements
- Slightly larger chassis meant we had more room for electronics
- Drum still very solid
- Drive train worked well in all of our matches
- Armor did its job
- RIP Paint Job 2019
- ESCs worked perfectly
- MYSTERY MACHINE MAKEOVER
Changes/Improvements
- recalculate belt size, order more backups
- make side plates longer to accommodate electronics
- fix top and bottom plate to accommodate new side plates
- make a proper cutout for switch
- new drive motor
- fix holes in motor mount, side plates, (front plate if possible?)
- push pin in drive motors further
Notes:
(We lost to a lid :C)
(Name inspo: Scooby Doo, Sam's bucket hat)
(Grace Kahn, Cody Page, Judea Britt, Sam Bass, Seth Daly, Paulina Schuler, Hannah Lee)