Difference between revisions of "Doori"

From RoboJackets Wiki
Jump to navigation Jump to search
(Current Plans)
(Absolutely Not)
Line 120: Line 120:
 
=== Doorii ===
 
=== Doorii ===
  
==== Absolutely Not ====
+
==== No ====
  
 
== Notes ==
 
== Notes ==

Revision as of 19:46, 4 April 2019

Doori
Dadi
Year Of Creation 2018-2019
Versions
Current Version 1.0
Wins/Losses 0/2
Information and Statistics
Weight Class 3lb
Weapon Class Vertical Bar Spinner
Combined Wins/Losses 0/2

Doori is a 3lb. (beetle-weight) vertical bar spinner designed and constructed between the Fall of 2018 and Spring of 2019.

Competitions

Motorama 2019

Robojackets 20th Anniversary Competition

  • Results: 2/3
  • Victory vs. Furi (Drum Spinner)
    • Judge's Decision
      • After a moving dance competition between both robots, the Judges came to the difficult decision that Doori was the victor.
    • Both bots were unable to move their weapons
  • Victory vs. Literally Nothing
    • Doori's second and final victory was against a nonexistent (Disqualified) competitor
  • Loss vs. Groovi (Drum Spinner)
    • Judge's Decision

Versions

Doori

Created by: (Names of Builders/Group Members of aforementioned version of bot)

Drive Motors DYS BE1806 2300KV Motors
Drive Motor Gearboxes KITBOTS 1000rpm Gearmotor Gearboxes
Drive Motor Controllers DYS 20A Micro Opto Multi-rotor ESC
Weapon Motor Turnigy 2836 Brushless EDF Motor 3200kv
Weapon Motor Controllers TURNIGY Plush 40amp Speed Controller w/5A BEC
Receiver Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2
Remote Control Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2
Battery Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack

Problems

  • Not invertible. (Could not flip itself over.)
  • Skids got caught in the rough ground and the damaged arena floor.
  • Ramp extended beyond the range of the weapon and prevented opponents from making contact with the weapon.
  • 1/4" HDPE plastic armor did not work as intended. Instead of deflecting hits, chunks were taken out of the armor.
  • Wheels and weapon belt were exposed.
  • Had trouble with the tension of the weapon belt.
  • Hobbyking weapon ESC did not work. Turnigy ESC worked.
  • Because all the weight was concentrated in the center, It was very difficult to maneuver.

Good aspects

  • Armor was lightweight and reliable (for at least 30 seconds of uptime). Easy to replace.

Changes/Improvements

  • Skids need to glide on potentially rough surfaces.
  • Invertibility - taller wheels, shorter chassis, skids on top.
  • Front plastic should only be used as armor.

20th Competition Updates

  • New weapon mounts were designed with a smooth skid incorporated into the shape
  • Ramps were kept but did not make contact with the floor
  • Sandpaper was attached to the outside of the wheel for extra traction

Recommendations for Future Members

  • The design behind Doori is inherently flawed and can't be improved upon without major changes to the Robot.
  • The team of Doori does not recommend using Doori as a starting template for a vertical bar spinner. (Please start from scratch).
  • One major benefit to Doori was that it proved plastic armor is a viable option for absorbing some hits.
    • The team of Doori advises vertical bar spinners to consider where their weight is concentrated. Because the weight of plastic is so light, teams may be tempted to let the weight go towards the weapon which, like Doori, could make steering very difficult.

Doorii

No

Notes

Name origin

  • Doori was intended to be a 'door'stop with a weapon
  • Door + i = Doori
  • Contrary to popular belief, Doori's name did not draw inspiration from an aquatic Disney character.

Names of original builders

  • Reilly Lennon - Mentor
  • Seungju Jason Lee
  • Bailey (Splenda) Painter
  • Emaad (LeBron James) Shamsi
  • Ryota Tsutsumi
  • Sam Winegardner

Trivia?

  • "What bananas? And why are you so tired of them?" -Splenda