From RoboJackets Wiki
Jump to navigation Jump to search
Year Of Creation 2018-2019
Current Version 1.0
Wins/Losses 0/2
Information and Statistics
Weight Class BeetleWeight
Weapon Class Vertical Bar Spinner
Combined Wins/Losses 0/2

(Replace this text with an overall introduction of your robot's design, name, features, ect)


Motorama 2019



Created by: (Names of Builders/Group Members of aforementioned version of bot)

Drive Motors DYS BE1806 2300KV Motors
Drive Motor Gearboxes KITBOTS 1000rpm Gearmotor Gearboxes
Drive Motor Controllers DYS 20A Micro Opto Multi-rotor ESC
Weapon Motor Turnigy 2836 Brushless 450-Size Heli Motor 3700kv
Weapon Motor Controllers Turnigy Super Brain 40A Brushless ESC
Receiver Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2
Remote Control Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2
Battery Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack


  • (List of Problems, 1 per bullet point)

- Our belt was too tight around the motor and weapon, which may have been the cause of the weapon failing to spin up on occasion.

- Putting together our weapon assembly was time consuming and difficult

- Screws shearing due to a drum spinner which gave hits to our bottom plate

- Wiring packing would bump up against our drive motors and cause them to lock up, even after zip tying

- Weapon deformation after hit, which destroyed our bearing and made us unable to spin up

- Driving on skids was difficult

- The gearboxes started falling apart

- Some of our holes which could have been through-holes were not. Therefore it made finding the right size screw difficult.

- ESCs were malfunctioning

- it catcheded on fire

Good aspects

  • (List of good aspects, 1 per bullet point)

- Our bot was invertable due to our fins

- The armor held up well under hard hits and pressure

- The wedges held up surprisingly well

- Robot structure was sound and did well under hits

- When our weapon could actually spin up, it was able to do significant damage

- We could easily replace broken parts

- Our name was pretty litty


  • (List of suggested improvements/changes, 1 per bullet point)

- We need to make the back plate less susceptible to hits from below, which allowed other bot to get underneath us. Perhaps a taco?

- Weapon needs to be redesigned to be thicker and not deform

- A new ESC that can actually start our weapon up

- We also need stronger bearing that can actually handle the hits

- Change the weapon shaft thickness to keep it from bending

- Wrap our wheels in electrical tape for added friction to make driving easier


(random joke, optional)

(Naming inspiration, optional)

- We named it (un)lucki with the un being optional. Turns out the un wasn't optional.

(Names of original builders)

- Original builders:

Ava Thrasher

Alex Yu

Nikhil Chittaluru

Andrew Morell