Difference between revisions of "Prototype Modification List 2015"
Jump to navigation
Jump to search
(Created page with "This is a list of the modifications the team learned was needed from assembling the 2015 RoboCup prototype. *Kicker solenoid was raised by modifying front and back face of so...") |
(No difference)
|
Revision as of 15:12, 29 March 2015
This is a list of the modifications the team learned was needed from assembling the 2015 RoboCup prototype.
- Kicker solenoid was raised by modifying front and back face of solenoid.
- Midplate mouth cutout was increased in width to account for dribbler wires.
- Dribbler mounts were moved outwards .005 in on each side to allow for sliding tolerance for dribbler.