Difference between revisions of "3lb Beginner's Guide"
Joldenburg6 (talk | contribs) m (Categorize) |
m |
||
| Line 8: | Line 8: | ||
=== Drum Spinner === | === Drum Spinner === | ||
| − | + | [[File:(Radiis).jpeg|frame|Examples of Drum Spinners]] | |
| + | |||
Pros | Pros | ||
| − | * | + | * Great beginner bot |
| − | * | + | * Reliable due to simple weapon |
| − | * | + | * Outputs good damage |
| + | * Weapon doesn't require too much space away from the rest of the bot | ||
| + | * Easily reversible | ||
| + | |||
Cons | Cons | ||
| − | * | + | * Smaller strike zone |
| − | * | + | * Gyroscopic effect can make fast turns hard |
| − | * | + | * Large heavy weapon |
=== Horizontal Bar Spinner === | === Horizontal Bar Spinner === | ||
| Line 78: | Line 82: | ||
=== Step 1: Sketch === | === Step 1: Sketch === | ||
| − | Here's a description about how the sketching process works (limited dimensions, focus of features, | + | Here's a description about how the sketching process works (limited dimensions, a focus of features, roundtable discussion) |
=== Step 2: Draw === | === Step 2: Draw === | ||
| Line 90: | Line 94: | ||
=== Step 4: CAD Parts === | === Step 4: CAD Parts === | ||
| − | Here's a description about how CADing the individual parts should work (division of labor vs team all being on the same page) | + | Here's a description about how CADing the individual parts should work (the division of labor vs team all being on the same page) |
=== Step 5: CAD Assembly === | === Step 5: CAD Assembly === | ||
| Line 108: | Line 112: | ||
=== Machines and what they do === | === Machines and what they do === | ||
| − | * Machine 1 : Does stuff | + | * Machine 1: Does stuff |
| − | * Machine 2 : Does other stuff | + | * Machine 2: Does other stuff |
| − | * Machine 3 : Profit | + | * Machine 3: Profit |
=== Rules === | === Rules === | ||
| − | * Rule 1 : No killing yourself | + | * Rule 1: No killing yourself |
| − | * Rule 2 : Beware the spinny bit on the mill | + | * Rule 2: Beware the spinny bit on the mill |
| − | * Rule 3 : No bathing in the water jet | + | * Rule 3: No bathing in the water jet |
=== Tips and Tricks === | === Tips and Tricks === | ||
| − | * How to turn on waterjet | + | * How to turn on the waterjet |
| − | ** Step 1 : ... | + | ** Step 1:... |
| − | ** Step 2 : ... | + | ** Step 2:... |
* What materials to use where | * What materials to use where | ||
* If xyz breaks, do abc | * If xyz breaks, do abc | ||
Revision as of 19:35, 5 July 2018
Contents
Introduction
- these
- are
- place holders
Choosing a Robot
Drum Spinner
.jpeg)
Pros
- Great beginner bot
- Reliable due to simple weapon
- Outputs good damage
- Weapon doesn't require too much space away from the rest of the bot
- Easily reversible
Cons
- Smaller strike zone
- Gyroscopic effect can make fast turns hard
- Large heavy weapon
Horizontal Bar Spinner
Description of bot Pros
- pro 1
- pro 2
- pro 3
Cons
- con 1
- con 2
- con 3
Vertical Bar Spinner
Description of bot Pros
- pro 1
- pro 2
- pro 3
Cons
- con 1
- con 2
- con 3
Ring Spinner
Description of bot Pros
- pro 1
- pro 2
- pro 3
Cons
- con 1
- con 2
- con 3
Wedge
Description of bot Pros
- there are none
Cons
- con 1
- con 2
- con 3
What is a Robot
Here I imagine a table, containing typical parts (weapon, motors, receiver), descriptions of the parts, typical weights and dimensions, and accompanying picture(s)
Design Process
Introduction
Here's where there will be a small speech about the importance of the design process
Step 1: Sketch
Here's a description about how the sketching process works (limited dimensions, a focus of features, roundtable discussion)
Step 2: Draw
Here's a description about how the technical drawing process works (concentration of dimensions, viewpoints, and materials)
Step 3: Picking a motor
Here's a description on how to pick a motor (math n stuff)
Step 4: CAD Parts
Here's a description about how CADing the individual parts should work (the division of labor vs team all being on the same page)
Step 5: CAD Assembly
Here's a description about how assembling the CAD parts works (things to consider regarding final CAD for design review)
Step 6: Design Review
Here's a description about the design review (what to expect)
Step 7: Revise and repeat
Here's a description about what to do after the design review
Machining
Machines and what they do
- Machine 1: Does stuff
- Machine 2: Does other stuff
- Machine 3: Profit
Rules
- Rule 1: No killing yourself
- Rule 2: Beware the spinny bit on the mill
- Rule 3: No bathing in the water jet
Tips and Tricks
- How to turn on the waterjet
- Step 1:...
- Step 2:...
- What materials to use where
- If xyz breaks, do abc
Physics and Math (Oh my!)
Here's where there will be a rehashing of the math formulas and physics properties to know
Documentation
Here's where a guide regarding documentation will be
Previous bots
Here's where links to previous bots that are good examples will be
Probably another section I'm forgetting
meme
