Difference between revisions of "2015 Chipper"
Jump to navigation
Jump to search
(Created page with "== The Goal == ==== The goal when creating the chipper was to simplify the design. We incorporated a Flat Solenoid as to fit the geometry of our robot. Esse...") |
|||
| Line 1: | Line 1: | ||
== The Goal == | == The Goal == | ||
| − | + | The goal when creating the chipper was to simplify the design. We incorporated a [[Flat Solenoid|Flat Solenoid]] as to fit the geometry of our robot. Essentially the solenoid armature slides barely touching the bottom plate hitting a pivot arm which the golf ball is resting on. This applies a force at a 55 degree angle upwards. | |
Revision as of 09:26, 19 June 2015
The Goal
The goal when creating the chipper was to simplify the design. We incorporated a Flat Solenoid as to fit the geometry of our robot. Essentially the solenoid armature slides barely touching the bottom plate hitting a pivot arm which the golf ball is resting on. This applies a force at a 55 degree angle upwards.
