Bucki

Bucki
(Highlight text)
Year Of Creation	2021-2022
Versions
Current Version	V 1.0
Update Year	2021-2022
Wins/Losses	0/2
Information and Statistics
Weight Class	Hobbyweight
Weapon Class	Pneumatic Flipper
Combined Wins/Losses	0/2
Weapon Speed	Around 80000?
Other	Never moved lol

Bucki is not the first iteration of a 18 lb Bent Bar Shuffler. Bucki is unfortunately the first iteration of the 12 lb pneumatic flipper. The purpose of this guide is to explain all of the reasoning behind the design decisions during the creation of Bucki. This guide will go in depth on why certain designs were chosen as well as explaining some of the calculations used to support those decisions.

Competitions

Motorama 2022

• Results:
  • Bracket Style: Double Elimination
    • Loss vs Hocki lmao
      • Bot did not move and we immediately gave up
      • "Victory by intimidation"
    • Loss vs Who Knows?
      • Bot did not fire and we immediately gave up

Bucki V1.0

Created by: Daniel Johnson, Martha Leach, Mesum Zaidi, Natalie Van Slyke, Scott Janssen, Keaton Sadoski, Samuel Alzate, Anthony DeCesaris, Paul Barsa

Drive Motors	Turnigy 540L V-Spec Inrunner 810kv
Drive Motor Controllers	HobbyKing Brushless Car ESC 2S-4S
Weapon Motor	wind
Weapon Motor Controllers	YEP 100A (2~6S) SBEC Brushless Speed Controller
Receiver	Hobby King 2.4Ghz Receiver 6Ch V2
Remote Control	Hobby King 2.4Ghz 6Ch Tx and Rx V2
Battery	2x Turnigy 2200mAh 4S 30C Lipo Pack
(OTHER:)	MS-05 Switch

Chassis

Design Overview

BLANK

Design Decisions

BLANK

Evaluation

BLANK

Drive Assembly

Overview

Bucki’s Drive system was not.

Design Decisions

There were none.

Calculations

BLANK

Evaluation

BLANK

Weapon Assembly

Overview

BLANK

Design Decisions

BLANK

Calculations

BLANK

Evaluation

BLANK

Electronics

Overview

BLANK

Design Decisions

BLANK

Calculations

BLANK

Evaluation

BLANK

Pneumatics

Design Overview

As a flipper, Bucki launches its opponents into the air using rapid, impulsive force. To this end, it utilizes a liquid CO2 system to power an air cylinder and actuate its flipping motion. The liquid CO2 is stored in pre-filled 20 gram cartridges, which are inserted into a specialty regulator to reduce the operating pressure to an amount manageable by the most fragile elements of the design.

Upon exiting the regulator, the decompressed CO2 is held upstream of a 3 port/2 state solenoid valve, which allows for intake of air into the piston and exhaust following the end of its stroke. This solenoid is controlled using signals from a standard RC controller interpreted by a microcontroller.

Also upstream of the solenoid valve, the system features a bleed valve to empty the system following operation and a pressure gauge to monitor the regulator’s output. These components are connected with a variety of connectors and lengths of tubing.

Bucki Pneumatics Diagram

Design Decisions

• A liquid CO2 system was chosen for its small form factor and reduced weight relative to the standard HPA design.
  • HPA necessitates a larger tank that needs to be recharged, while CO2 cartridges can be switched out rapidly.
  • Recharging a HPA tank would require a more powerful air compressor (such as a SCUBA or paintball one) than the ones that are easily available on campus.
  • HPA operates at pressures and capacities that are excessive for the other limits imposed on the system.
• The specialty regulator was chosen for its ability to pierce CO2 cartridges and convert their input to a standard NPT size.
• The solenoid valve chosen was decided based on its low weight and size, but other options (such as some valves from Parker) would have been superior in terms of pressure and power.
• The system was primarily constrained by weight and size and would've been better served with a larger piston and greater pressure.
• NERC rules were relatively loose, but they required the use of a gauge and a method to bleed the system.
• Liquid CO2 when decompressing to a gaseous state undergoes an endothermic reaction that rapidly cools the components and reduces the tank pressure.

Calculations

I need to go hunt these down lmao

Evaluation

• Pneumatics are incredibly difficult at a 12lb weight class according to officials at Motorama, so it existing is kind of impressive.
• The system was able to actuate more than 15 times rapidly without issue.
• It was never used to flip anything and it is still unknown whether it matched the calculation or was sufficiently powerful.
• It had various issues that made assembly difficult:
  • Some components did not match spec sheets and required the system to be modified.
  • Modifications required deviation from initial placement plan which made fitting system in chassis difficult.
  • Chassis had no systems to aid in assembly or constrain parts.

Links

Safety Documentation

See also

• [(link to other bot made this year) (Name of other bot made this year)]

Notes:

Naming Inspiration: Nothing good; should've been Topsi Turvi

Took least amount of damage of any bot in Motorama history