Crispi
Revision as of 20:07, 5 April 2019 by Dcrawford41 (talk | contribs)
Crispi/Crunchi | |
---|---|
Year Of Creation | 2018-2019 |
Versions | |
Current Version | 1.0 |
Wins/Losses | 2/4 |
Information and Statistics | |
Weight Class | BeetleWeight |
Weapon Class | Drum Spinner |
Combined Wins/Losses | 0/2 |
(Replace this text with an overall introduction of your robot's design, name, features, ect)
Contents
Competitions
Motorama 2019
- Results: 0/2
- Bracket Style: Double Elimination
- Loss vs Scratch Attack
- Horizontal Bar Spinner
- Drive gave out, weapon stopped spinning, drive stopped moving. Basically it was paralyzed in fear.
- Loss vs Entropi
- Beater Bar
- Electronics continued to not work and we took a nasty hit to the taco.
- (observations))
- Loss vs Scratch Attack
- Bracket Style: Double Elimination
20th Anniversary Competition
- Results: 2/2
- Bracket Style: Round robin, single elimination
- Forfeit vs Dynastinai
- Horizontal Bar Spinner
- Electronics pressed too tightly against drive motors. Could not move, chose to forfeit.
- Win vs Daddi
- Horizontal Bar Spinner
- Daddi's drive not working.
- Win vs unknown team
- They forfeited.
- Loss vs. M.A.D.(Mutually Assured Destruction)
- Horizontal Bar Spinner
- After two hits, drum wouldn't spin up. Sandpaper on wheels came off, and right wheel also fell off. Lost drive on one side, then completely lost drive. After fight, found that the weapon motor was in pieces.
- (observations))
- Forfeit vs Dynastinai
- Bracket Style: Round robin, single elimination
Versions
Crispi/Crunchi
Created by: The Dennis Rodney Crawford The Third, Brenden Chance Waits, Hoyean Le, Celina Huang, Damian Huerta, Jonathan William Paul and his infinite wisdom, Sanket Something, Alexander Elliott, Annie Liu, Derrick Mu, Nathan Wang
Drive Motors | DYS BE1806 2300KV Motors |
Drive Motor Gearboxes | KITBOTS 1000rpm Gearmotor Gearboxes |
Drive Motor Controllers | DYS 20A Micro Opto Multi-rotor ESC |
Weapon Motor | Turnigy 2836 Brushless EDF Motor 3200kv |
Weapon Motor Controllers | Turnigy ESC 40 A w/ 5A BEC |
Receiver | Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2 |
Remote Control | Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2 |
Battery | Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack |
Problems
- Small amount of room for electronics
- Low drive capability, wheels too far back
- High friction on front skids
Good aspects
- Looks menacing as hell
- Chassis held up extremely well
Changes/Improvements
- Move wheels further up towards center of mass
- Lengthen the plastic back taco towards front in order to allow more room for electronics
- Possibly widen or lengthen chassis, which would allow for a longer weapon if widened as well as more room for electronics
Notes:
(random joke, optional)
(Naming inspiration, optional)
(Names of original builders)