Entropi

Entropi
Year Of Creation	2018-2019
Versions
Current Version	1.0
Wins/Losses	1/2
Information and Statistics
Weight Class	BeetleWeight
Weapon Class	Beater Bar Spinner
Combined Wins/Losses	1/2

(Entropi is a 3lb beater bar battlebot, first of its kind constructed for Robojackets. It is designed around an aluminum chassis, steel weapon, and high density polyethylene armor. )

Competitions

Motorama 2019

• Results: 1/2
  • Bracket Style: Double Elimination
    • [(https://photos.app.goo.gl/ck1qStzFy7tt4jHFA) Loss vs Wedge of Allegiance, wedge bot]
      • (notes)
      • (observations))
    • [(https://photos.app.goo.gl/Y39F3mGyiWAnHq6Q7) (Win) vs (Crispi, GT Drum spinner, damaged]
      • (notes)
      • (observations))
    • [(https://photos.app.goo.gl/XgFUz8x4dkK6vZtH6) Loss vs opponent, Kit Beater bar]
      • (notes)
      • (observations))

Versions

Entropi

Created by: (Names of Builders/Group Members of aforementioned version of bot)

Drive Motors	DYS BE1806 2300KV Motors
Drive Motor Gearboxes	KITBOTS 1000rpm Gearmotor Gearboxes
Drive Motor Controllers	DYS 20A Micro Opto Multi-rotor ESC
Weapon Motor	(Weapon Motor Name)
Weapon Motor Controllers	(Weapon Motor Controller Name)
Receiver	Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Receiver V2
Remote Control	Turnigy T6A-V2 AFHDS 2.4GHz 6Ch Transmitter V2
Battery	Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack

Problems

• (List of Problems, 1 per bullet point)
• screws did not have enough contact, too shallow threads
• tolerances between shaft and ball bearings resulted in shaking that caused screws to come out
• large regions of useless aluminum on side plates
• back plastic armor affected wheel contact
• screws on hub (4-40) too thin to handle impacts
• open access to electronics by spinning weapon
• small bearings

Good aspects

• (List of good aspects, 1 per bullet point)
• side plastic armor for wheels prevented total destruction of wheel, lasted several hits from a kit beater bar
• rear plastic armor allowed robot to not become trapped on a flat surface without wheel coverage.
• heavy weapon and good weapon motor
• drive while inverted
• Sturdy axle
• compact, easy access to electronics
• low friction between axle and hub

Changes/Improvements

• (List of suggested improvements/changes, 1 per bullet point)
• increase depth of screws
• increase width of axle
• increase size of bearings
• increase weapon attachment screw diameter

Notes:

(random joke, optional)

(Name inspired by our mentor Thomas, and also because we are lazy )

(Built by: Dylan Adriano, Maxwell Kazman, Adhiraj Bhagat, Bhuiyan Rifat, Colin Stewart, Connor Bradshaw, Prathic Sundararajan, Rajan Vivek, Ryan Chen, Surya Kaliki)