Yearly Housekeeping

This page lists all the things the organization must do toward the end of the spring and during the summer in order to prepare for the upcoming school year. For each people to know section you can find contact info at GaTech Directory

President & Vice President

People To Know

Development

• Assoc. Director of Corporate Development - Caroline Wood
• School of Mechanical Engineering - Director of Development - Tom Lawley
• School of Electrical and Computer Engineering - Associate Director of Development - Etta Pittman

Key Faculty Contacts

• College of Computing - Director of the center for Robotics and Intelligent Machines (RIM) - Henrik Christensen

Public Relations Chair

If you need to print things see the ME media people (mainly Rona Ginsberg). They have a very fast 300dpi color laser printer, paper cutter, and auto paper folder. There is also a 300 dpi plotter that prints up to 42in wide on gloss or matte in both the library east commons and the student center crafts center. The plotters do cost money.

People To Know

This should be updated at least yearly as some of these positions can change.

Media & Publications

• School of Mechanical Engineering - Media Guru - Rona Ginsberg
• Technique - Editor - Craig Tabita
• Institute Communications and Public Affairs - Media Relations Specialist - David Terraso
• College of Computing - Director of Communications - Stefany Wilson (Also RIM)
• College of Computing - Office of Student Services - Director of Diversity & Community - Giselle Martin

Communications

• College of Engineering - Assistant Dean for Undergraduate Studies - Jane Weyant (undeclared engineering students)
• School of Aerospace Engineering - Academic Advisor - Daurette Joseph (knows whats going on such as events)
• School of Aerospace Engineering - Academic Assistant - Rebekah Trout (manages email lists)
• School of Electrical and Computer Engineering - Manager, Undergraduate Academic Advising - Claudia Ford (manages email lists)
• School of Civil and Environmental Engineering - Academic Advisor - Mary George (manages email lists)
• School of Physics - Kevin Carter (manages undergrad list)

Materials

These need to be maintained and updated every year. They should always have our website, the Presidents contact info and the PR contact info on it.

Website and Gallery

Make certain all officers and team leaders both have the necessary access and know how to post to the website. Also maker sure people who need to be able to post the gallery both know how to and have access as well. In addition to accessibility, keep them fresh, updated and alive.

Mechanical Engineering Brochure

This is a brochure that the ME department uses. They use this for one whole year and it is given out to prospective students, new students, possible sponsors (either to us or ME), visitors, and interested parties. This will also be given out by us at many events and should offer a good overview of who we are and what we did last year. To update this, talk to Rona Ginsberg and update the other things that are handed out that talk about us.

Intro Event Hand Out

Something about the size of a post card (maybe bigger). It should have our intro meeting time, date, location, logos of each event, the location of the SCC, and a short about us.

Business Cards

Should have the contact info for the Pres, V Pres, website, and for your self since you are the contact for all thing media related.

List of Leaders and Contact Info

Once the new officers and if necessary new team leaders have been decided, you need to update the list of Leaders and Team Leaders. This list should have both the cell number and email address of each team leader and officer. This is needed by Sterling Skinner (man who is in charge of the SCC) and it needs to be posted in the electrical room.

Shirts

Inventory all of the shirts and find out how many of each type and size. Figure out how many we need of each and get a quote.

Events

There are two important events that always happen and are a good source for new members. Also find out what else is going on around campus there will be more check with RIM and ME. Also look for department hosted socials to kick off the new school year these are great place to have a table and promote the RoboJackets. In addition, many schools have locations where you can put up a poster or some brochures.

FASET

This is the freshman student orientation. There are six events and this is by far one of the best ways to meet new and incoming students.

• 1) In April the FASET application needs to be filled out and turned in
• 2) Handouts for Intro meeting
• 3) Brochure from ME dept
• 4) Display

If funding allows try to have a giveaway (ie. a RJ T-shirt NOT POLO's)

Grad Expo

This is for incoming grad students and happens only once in August.

• 1) In May / June the application needs to be filled out and turned in.
• 2) Handouts for Intro meeting (see intro meeting for more)
• 3) Brochure from ME dept
• 4) Display

If funding allows try to have a giveaway (ie. a RJ T-shirt NOT POLO's)

Involvement Fair

Usually held on Skiles Walkway during either first or second week of school in the middle of the day.

• 1) App Due end of July / beginning of Aug.
• 2) Handouts for Intro meeting (see intro meeting for more)
• 3) Brochure from ME dept
• 4) Display

Introductory Meeting

This one you have to setup and plan. It is suggested that you have it in the student center ballroom (because new students will at least east know where the student center is located). It should also be on either the second or third week of class and not on Friday. Booking the event will cost some cash though not a lot (less than $100). Before the intro meeting you should visit each school ME, AE, EE, CS, etc and try to get the to spam their list about our meeting (around the first week of school). Once booked, the student center contact for events will need to meet with you about 2 to 3 weeks before hand to verify and make sure you are getting what we need.

You need at least

• Powerpoint
• Short video
• Some robots

Other Events

Look for things like departmental socials and other events. You should try and find out about these in advance of their announcement inorder to have enough time to prepare. So talk to the people above in the People To Know section in the summer.

You need

• Display
• Brochure
• Robots

FIRST Kickoff

You need

• Display
• Brochure

FIRST Peachtree Regional

You need

• Display
• Brochure

Tool / Shop Master

People to Know

• Student Competition Center - Sterling Skinner

Technology and Computer Related

Every computer except our web server boots with Windows XP Pro SP2 and the elctrical computer also boots with Ubuntu.

People To Know

• Student Competition Center - Sterling Skinner
• Mechanical Engineering - Information Technology Specialist - Richard Duplessis

Cleaning

The two cad machines need to be cleaned and updated editions of each software (if possible) need to be installed.

Note: The list below only applies to windows operating system.

Engineering Software List (this list only applies to the CAD machines)

• Labview
• Autodesk AutoCAD
• Autodesk Inventor
• Autodesk Vault Server (only 1 machine)
• UGS Solidedge
• MatLab
• Solidworks

Basic Software

• Firefox
• SmartFTP
• Putty
• OpenOffice
• Aspell
• Inkscape
• HDGraph
• CutePDF Printer
• PDF Reader (Adobe or Foxit)
• CutePDF (Fake printer that makes PDF's)
• VLC Media Player
  • Also current codecs
• 7-Zip

Other Software

• MS Office
• Adobe Photoshop