Difference between revisions of "180i"
Jump to navigation
Jump to search
(→UGA Spring Smash 2025) |
(→180i) |
||
| Line 86: | Line 86: | ||
| Battery | | Battery | ||
| GNB 3s 300 mAh | | GNB 3s 300 mAh | ||
| − | |||
| − | |||
| − | |||
|} | |} | ||
==== Problems ==== | ==== Problems ==== | ||
| + | *the weapon motor gear was originally connected to gear at the shaft, the shell didn't spin cuz we needed a higher gear ratio. we later changed to making a ring gear in the inside of the shell and it fixed our problem. so gear ratios important | ||
| + | *there was not a lot of space for electronics, but we figured it out with prayers (hot glue and zipties) | ||
*probably shouldve made the shell spokes thicker | *probably shouldve made the shell spokes thicker | ||
| − | * driving was a | + | *driving was a very rough because the center of gravity wasnt centered left/right |
*forks are the death of us | *forks are the death of us | ||
| − | *also we never spun up past like 50% because it made it so unstable | + | *also we never spun up past like 50% because it made it so unstable (it jumped) |
==== Good aspects ==== | ==== Good aspects ==== | ||
| − | *it hit pretty hard, most of our wins were through tapout or ko and we tore the weapon completely off of jinx | + | *it hit pretty hard, most of our wins were through tapout or ko and we tore the weapon completely off of jinx with half a shell |
*zip ties, hot glue, and electrical tape were good enough to keep the electronics in, nothing ever fell off | *zip ties, hot glue, and electrical tape were good enough to keep the electronics in, nothing ever fell off | ||
| − | *also nothing ever failed electronically which might have been a miracle | + | *also nothing ever failed electronically which might have been a miracle (just make sure electronics are super secure) |
*self righting worked like perfectly every time | *self righting worked like perfectly every time | ||
| Line 108: | Line 107: | ||
*thicken the shell spokes | *thicken the shell spokes | ||
| − | *tangent drive to something else probably cuz no space for full 4wd (tank tread drive?) | + | *very hard to drive so tangent drive to something else probably cuz no space for full 4wd (tank tread drive?) |
== See also == | == See also == | ||
Revision as of 20:29, 25 April 2025
| 180i | |
|---|---|
| Year Of Creation | 2025-2025 |
| Versions | |
| Current Version | V1 |
| Wins/Losses | 5/2 - goated |
| Information and Statistics | |
| Weight Class | Plastic Antweight |
| Weapon Class | Shell Spinner |
| Combined Wins/Losses | 5/2 |
| Weapon Speed | spins fast |
Plastic antweight shell spinner.
Contents
Competitions
UGA Spring Smash 2025
- Results: 5-2
- Bracket Style: Double Elimination
- All matches
- JD Loss vs Torbor v2
- took out a spacer in the shell before the match because we thought we didnt need it (we did)
- this made spinning up the shell suck so we lost jd cause of control
- JD Win vs Jinx
- shell sheared in half at the layer lines but it still worked lol
- this shell was printed without an enclosure so it came out a lot weaker
- TO Win vs Whatchamacallit
- Aaron achieved his one and only life goal
- TO Win vs Tomfooleri
- #riptomfooleri
- #180i>>>tomfooleri
- KO Win vs Artificial Watermelon Flavoring
- we got lucky they couldn't self right because they were really good at driving
- TO Win vs Torbor v2
- KO Loss vs Swoop Plastic
- shell broke at the spokes
- in hindsight probably shouldve switched the shell out
- JD Loss vs Torbor v2
Version
180i
Created by: Aaron Qu, Deep Patel
| Drive Motors | Repeat 1406 Tangent Drive Motors |
| Drive Motor Controllers | Repeat AM32 Dual Brushless Drive ESC |
| Weapon Motor | Repeat 2822 Direct Drive Motor V2 |
| Weapon Motor Controllers | Readytosky 35A blheli_s Ant Weapon ESC |
| Receiver | FlySky FS2A 4CH AFHDS-2A Mini |
| Remote Control | Flysky FS-i6 |
| Battery | GNB 3s 300 mAh |
Problems
- the weapon motor gear was originally connected to gear at the shaft, the shell didn't spin cuz we needed a higher gear ratio. we later changed to making a ring gear in the inside of the shell and it fixed our problem. so gear ratios important
- there was not a lot of space for electronics, but we figured it out with prayers (hot glue and zipties)
- probably shouldve made the shell spokes thicker
- driving was a very rough because the center of gravity wasnt centered left/right
- forks are the death of us
- also we never spun up past like 50% because it made it so unstable (it jumped)
Good aspects
- it hit pretty hard, most of our wins were through tapout or ko and we tore the weapon completely off of jinx with half a shell
- zip ties, hot glue, and electrical tape were good enough to keep the electronics in, nothing ever fell off
- also nothing ever failed electronically which might have been a miracle (just make sure electronics are super secure)
- self righting worked like perfectly every time
Changes/Improvements
- thicken the shell spokes
- very hard to drive so tangent drive to something else probably cuz no space for full 4wd (tank tread drive?)
See also
- [(link to other bot made this year) (Name of other bot made this year)]
Notes:
(random joke, optional)
(Naming inspiration, optional)
(Names of original builders)
