Difference between revisions of "RC09-DriveModule"
Jump to navigation
Jump to search
(→Action Log) |
(→Action Log) |
||
| Line 70: | Line 70: | ||
# 12/30/2008 - Initial design of gear box completed. | # 12/30/2008 - Initial design of gear box completed. | ||
# 01/11/2009 - Removed mass and moved to 1/8" plate for motor mounting. | # 01/11/2009 - Removed mass and moved to 1/8" plate for motor mounting. | ||
| + | # 01/12/2009 - Dropped 8-32 screws to 6-32, and made treading full on hex.. | ||
# 01/13/2009 - Confirmed that Maxon does offer custom shafts for motors and added current materials to wiki. | # 01/13/2009 - Confirmed that Maxon does offer custom shafts for motors and added current materials to wiki. | ||
[[Category: RoboCup Mechanical]] [[Category: 2009]] | [[Category: RoboCup Mechanical]] [[Category: 2009]] | ||
Revision as of 18:42, 13 January 2009
As part of the RoboCup 2009 Mechanical, Drive Modules integrate the motor, gearbox and omniwheel in to one modular assembly.
Contents
Assembly Structure
Parts List
Instructions
Parts & Components
Gears & Bearings
Motor Output Gear
- Vendor - SDP/SI
- Part No. - S1VS05M016F0704
- Cost - $22.06 ($18.16)
- Description - Module 0.5, 16 Teeth, 20° Pressure Angle, 303 Stainless Steel Gear
Motor Output Gear (Option B)
- Supplied with motor
Motor Output Gear (Option C)
- Pinion shaft installed by us.
Internal Gear
- Vendor - SDP/SI
- Part No. - S1E05ZM05S072
- Cost - $31.10 ($28.48)
- Description - Module 0.5, 72 TEETH, 20° Pressure Angle, 303 Stainless Steel, INTERNAL GEAR
Bearing (1/4" Shaft)
- Vendor - Grainger
- Part No. - 1ZEJ7
- Cost - $5.59 Each
- Description - Miniature Ball Bearing, Open, Flanged, Bore Dia 0.2500 In, Outside Dia 0.5000 In, Width 0.1250 In, Flange Dia 0.5470 In, Flange Thickness 0.0230 In, ABEC Level 3
- Info - Web Link
Stock
Al Plate 1/8"
- Vendor - McMaster-Carr
- Part No. - 89015K18
- Cost - $26.06
- Description - Alloy 6061 Aluminum Sheet .125" Thick, 12" X 12"
Al Plate 0.16"
- Vendor - McMaster-Carr
- Part No. - 89015K17
- Cost - $16.66
- Description - Alloy 6061 Aluminum Sheet .016" Thick, 6" X 48"
Fasteners
6-32 Low Head Socket Cap Screw
- Vendor - McMaster-Carr
- Part No. - 92220A141
- Cost - $7.42 (Packs of 25)
- Description - Alloy Steel Low Head Socket Cap Screw 6-32 Thread, 1/4" Length
M3 x 6 Metric Flat Head Socket Cap Screw
- Vendor - McMaster-Carr
- Part No. - 91294A126
- Cost - $6.76 (pk 100)
- Description - Metric Flat Head Socket Cap Screw Class 10.9 Stl, M3 Size, 6mm Length, .50mm Pitch (Needs 90 deg countersink)
1/16" Locating Pins
- Vendor - MSC Industrial Supply
- Part No. - 06020010
- Cost - $8.49 (pk 100)
- Description - Precision Ground Dowel Pins - Alloy Steel Type: Dowel Pin Diameter: 1/16 Overall Length: 1/4 Material: Alloy Steel - Grade 8 Finish/Coating: Bright
Action Log
- 12/29/2008 - Internal gears selected.
- 12/30/2008 - Initial design of gear box completed.
- 01/11/2009 - Removed mass and moved to 1/8" plate for motor mounting.
- 01/12/2009 - Dropped 8-32 screws to 6-32, and made treading full on hex..
- 01/13/2009 - Confirmed that Maxon does offer custom shafts for motors and added current materials to wiki.
