Difference between revisions of "RCmicro"

From RoboJackets Wiki
Jump to navigation Jump to search
m
Line 1: Line 1:
==Microprocessor==
 
 
The microprocessor is the heart of the 2007 robojackets robocup competition robot and acts as the interface between the wireless communication system and the robot proper. A simple firmware program monitoring the internal sensors of the robot and controling the motor and ball roller/shoot will run on the micro. Currently as part of our phase one objectives we are looking closly at processors from Atmel, SI Labs, Motorola, and PICs. Below are some specs.
 
The microprocessor is the heart of the 2007 robojackets robocup competition robot and acts as the interface between the wireless communication system and the robot proper. A simple firmware program monitoring the internal sensors of the robot and controling the motor and ball roller/shoot will run on the micro. Currently as part of our phase one objectives we are looking closly at processors from Atmel, SI Labs, Motorola, and PICs. Below are some specs.
 +
==The Wall==
 +
==To Do==
 +
*Finalize number of I/O and type (SPI, PWM, ADC, etc)
 +
*Design Schematic tying in all devices
 +
*Breadboard to test write simple code
 +
*Get board made
 +
*Write Code
 +
  
  

Revision as of 11:51, 1 June 2006

The microprocessor is the heart of the 2007 robojackets robocup competition robot and acts as the interface between the wireless communication system and the robot proper. A simple firmware program monitoring the internal sensors of the robot and controling the motor and ball roller/shoot will run on the micro. Currently as part of our phase one objectives we are looking closly at processors from Atmel, SI Labs, Motorola, and PICs. Below are some specs.

The Wall

To Do

  • Finalize number of I/O and type (SPI, PWM, ADC, etc)
  • Design Schematic tying in all devices
  • Breadboard to test write simple code
  • Get board made
  • Write Code


Specifications

Device 8 or 16-bit microprocessor
Power 3.3V Low pwt
Archetecture Atmel AVR
Clock ?
Memory Flash ?Kb
IO pins 32-64 pins Software Configurable
Interfaces SPI, UART
DA/AD (3)10-bit DAC (2)10/16-bit ADC
Timers 8-bit (3)
PWM Yes up to 4 channels
Programming JTAG

Schematics

Schematics

Articles

Possible Micros

Links


Electrical Homepage