Difference between revisions of "Homecoming car"

From RoboJackets Wiki
Jump to navigation Jump to search
(Information for working on the homecoming car)
 
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Welcome! You've found yourself on the page for the homecoming car, sorry about that.
+
[[Category:Core]]
  
== Background ==
+
Welcome! You've found yourself on the page for the Homecoming Car.
The homecoming car, also referred to as the Buzzmobile, is a joint effort between The Agency and RoboJackets. It is sponsored by the OEC and is intended to be an autonomous parade float modeled after the Ramblin Wreck. The homecoming car is currently stored in parking deck of Klaus Computing.
 
  
== Hardware ==
+
[[File:10644703 601719963291031 2139300614443510723 o.jpg|300px|10644703 601719963291031 2139300614443510723 o.jpg]]
Homecoming car is a nearly full sized replica of the Wreck. It has a body made of plywood supported by a steel frame. Many of the components on the car overlap with components found on a standard FRC robot. Buzzmobile has a 6-CIM chain drive train. The CIM motors are controlled by Victor motor controllers from Cross the Road Electronics. The victors receive their messages from an on board Arduino Uno. The Arduino also talks to the pneumatic break on  the car and can honk the horn of the wreck.  
 
  
== Software ==
+
== History ==
The code powering the homecoming car can be found on [https://www.github.com/gtagency/buzzmobile Github]. This is also where documentation on operating the car can be found.
+
The Homecoming Car, a.k.a. the Buzzmobile, was a joint effort between The Agency and RoboJackets. Commissioned and sponsored by the CoC's [https://www.cc.gatech.edu/student-life/gt-computing-community/oec-office Office of Outreach, Enrollment, and Community], was an autonomous parade float modeled after the Ramblin' Wreck for Georgia Tech's Wreck Parade homecoming event.
The majority of the code running the robot is written with Python and ROS, although there are some nodes written in C++.
 
  
== Recommended supplies ==
+
The Homecoming Car was decommissioned in the spring of 2018 in a joint decision among RoboJackets, The Agency, and the OEC, citing ongoing difficulties with storage space constraints and accessibility.
Following is a list of recommended things to take down to The Cage (the home of the car).
 
  
- A fan (it gets hot down there)
+
== Hardware ==
 +
The Homecoming Car is a nearly full sized replica of the Wreck. It has a body made of plywood supported by a steel frame. Many of the components on the car overlap with components found on a standard FRC robot. The car has a 6-CIM chain drive train. The CIM motors are controlled by Victor motor controllers from Cross the Road Electronics. The victors receive their messages from an on board Arduino Uno. The Arduino also talks to the pneumatic break on  the car.
  
- Extension cords
+
== Software ==
 +
The code powering the Homecoming Car can be found on [https://www.github.com/gtagency/buzzmobile Github]. This is also where documentation on operating the car can be found.
  
- A multimeter
+
The majority of the code running the robot is written with Python and ROS, although there are some nodes written in C++.

Latest revision as of 20:34, 13 June 2018


Welcome! You've found yourself on the page for the Homecoming Car.

10644703 601719963291031 2139300614443510723 o.jpg

History

The Homecoming Car, a.k.a. the Buzzmobile, was a joint effort between The Agency and RoboJackets. Commissioned and sponsored by the CoC's Office of Outreach, Enrollment, and Community, was an autonomous parade float modeled after the Ramblin' Wreck for Georgia Tech's Wreck Parade homecoming event.

The Homecoming Car was decommissioned in the spring of 2018 in a joint decision among RoboJackets, The Agency, and the OEC, citing ongoing difficulties with storage space constraints and accessibility.

Hardware

The Homecoming Car is a nearly full sized replica of the Wreck. It has a body made of plywood supported by a steel frame. Many of the components on the car overlap with components found on a standard FRC robot. The car has a 6-CIM chain drive train. The CIM motors are controlled by Victor motor controllers from Cross the Road Electronics. The victors receive their messages from an on board Arduino Uno. The Arduino also talks to the pneumatic break on the car.

Software

The code powering the Homecoming Car can be found on Github. This is also where documentation on operating the car can be found.

The majority of the code running the robot is written with Python and ROS, although there are some nodes written in C++.