Difference between revisions of "RC09-KickerChipper"
Jump to navigation
Jump to search
(→Action Log) |
(→Stock) |
||
| Line 10: | Line 10: | ||
===Stock=== | ===Stock=== | ||
| − | ===== | + | |
| + | |||
| + | =====Aluminum Kicker Plunger===== | ||
:Vendor - McMaster-Carr | :Vendor - McMaster-Carr | ||
| − | :Part No. - | + | :Part No. - 8974K25 |
| − | :Cost - $ | + | :Cost - $12.37 |
| − | :Description - Alloy | + | :Description - Multipurpose Aluminum (Alloy 6061), 7/16" Diam, 36" |
| − | ===== | + | =====Steel Kicker Plunger===== |
:Vendor - McMaster-Carr | :Vendor - McMaster-Carr | ||
| − | :Part No. - | + | :Part No. - 9120K14 |
| − | :Cost - $ | + | :Cost - $7.96 |
| − | :Description - | + | :Description - General-Purpose Low-Carbon Steel, 7/16" Diam, 36" |
| − | ===== | + | =====Rear Chipper Solenoid Mount===== |
:Vendor - McMaster-Carr | :Vendor - McMaster-Carr | ||
| − | :Part No. - | + | :Part No. - 9120K14 |
| − | :Cost - $ | + | :Cost - $7.96 |
| − | :Description - | + | :Description - General-Purpose Low-Carbon Steel, 7/16" Diam, 36" |
| + | =====Front Kicker Solenoid Mount===== | ||
| + | :Vendor - McMaster-Carr | ||
| + | :Part No. - 9120K14 | ||
| + | :Cost - $7.96 | ||
| + | :Description - General-Purpose Low-Carbon Steel, 7/16" Diam, 36" | ||
| + | |||
| + | =====Kicker Chipper Solenoid Mount===== | ||
| + | :Vendor - McMaster-Carr | ||
| + | :Part No. - 9246K51 | ||
| + | :Cost - $36.66 | ||
| + | :Description - Multipurpose Aluminum (Alloy 6061) 3/4" Thick, 8" X 8" | ||
Revision as of 05:28, 21 June 2010
As part of the RoboCup 2009 Mechanical, the kicker provides passing capabilities to the robots. It is part of the chipper / kicker assembly.
Contents
Related Pages
Parts & Components
Amounts are based on per robot. Materials are in sizes for prototyping not lowest cost per amount.
Stock
Aluminum Kicker Plunger
- Vendor - McMaster-Carr
- Part No. - 8974K25
- Cost - $12.37
- Description - Multipurpose Aluminum (Alloy 6061), 7/16" Diam, 36"
Steel Kicker Plunger
- Vendor - McMaster-Carr
- Part No. - 9120K14
- Cost - $7.96
- Description - General-Purpose Low-Carbon Steel, 7/16" Diam, 36"
Rear Chipper Solenoid Mount
- Vendor - McMaster-Carr
- Part No. - 9120K14
- Cost - $7.96
- Description - General-Purpose Low-Carbon Steel, 7/16" Diam, 36"
Front Kicker Solenoid Mount
- Vendor - McMaster-Carr
- Part No. - 9120K14
- Cost - $7.96
- Description - General-Purpose Low-Carbon Steel, 7/16" Diam, 36"
Kicker Chipper Solenoid Mount
- Vendor - McMaster-Carr
- Part No. - 9246K51
- Cost - $36.66
- Description - Multipurpose Aluminum (Alloy 6061) 3/4" Thick, 8" X 8"
NOTE: 2.4in long by .247in tall by .302in deep 7075 Grade, #8 32threads/in(8-32)
Action Log
- 10/12/2008 - Solenoid inner core diameter for prototype selected.
- 03/04/2009 - Fabrication issues with quality control have been encountered in winding the solenoid.
- 03/13/2009 - Decision has been made to purchase more of last years solenoids and attempt in house modifications.
- 03/22/2009 - Initial concept completed.
- 04/04/2009 - Resizing adjustments made.
- 04/12/2009 - Kicker rev1 design completed.
- 10/25/2009 - First fully machineable chipper design completed. (rev8)
- 01/31/2010 - Prototype kicker and chipper OTS solenoids re selected and designs updated.
- 01/31/2010 - Hardware testing of new electrical mockup shows estimated speeds of 12 m/s with 2008 solenoids.
- 02/02/2010 - New solenoids ordered.
- 02/07/2010 - Chipper & Kicker assemblies updated.
- 03/25/2010 - Chipper variants assembled and tested. Variants non functional.
- 03/26/2010 - Redesign completed, separate test rig designed, and fabrication started.
- 03/27/2010 - Fabrication completed and device tested. Chipper working with a range of up to 13ft. Longer solenoid stroke need for better power transfer.
- 04/04/2010 - Design refinements conducted.
