Difference between revisions of "RCmicro"

From RoboJackets Wiki
Jump to navigation Jump to search
(Articles)
(Data-Sheet)
Line 64: Line 64:
 
Opto-Isolator
 
Opto-Isolator
 
*[http://rocky.digikey.com/WebLib/Agilent/Web%20Data/HCPL-9xxx,x9xx,9xxJ,09xJ.pdf Agilent Opto-Isolator Get 15MD version]
 
*[http://rocky.digikey.com/WebLib/Agilent/Web%20Data/HCPL-9xxx,x9xx,9xxJ,09xJ.pdf Agilent Opto-Isolator Get 15MD version]
 +
LDO Regulator/Reset Supervisory Circuit
 +
*[http://datasheets.maxim-ic.com/en/ds/MAX6329-MAX6349.pdf MAX6349]
  
 
==Articles==
 
==Articles==

Revision as of 18:59, 8 March 2007

The microprocessor is the heart of the 2007 robojackets robocup competition robot and acts as the interface between the wireless communication system and the robot proper. A simple firmware program monitoring the internal sensors of the robot and controling the motor and ball roller/shoot will run on the micro. Currently as part of our phase one objectives we are looking closly at processors from Atmel, SI Labs, Motorola, and PICs. Below are some specs.

The Wall

9/14/06 - We chose a dev kit see the sparkfun link below. It'll cost $64.95 a pop and we are getting 3. 11/23/06 - Set the frequency of the mirco and added the crystall its needs

To Do

  • Finalize number of I/O and type (SPI, PWM, ADC, etc)
  • Design Schematic tying in all devices
  • Breadboard to test write simple code
  • Get board made
  • Write Code


Specifications

Device 32-bit microprocessor
Power 3.3V Low pwt
Archetecture ARM
Clock 57.272 MHz (14.318MHz Crystal)
Memory Flash 128Kb
IO pins 32-64 pins Software Configurable
Interfaces SPI, UART
DA/AD (3)10-bit DAC (2)10/16-bit ADC
Timers 8-bit (3)
PWM 4 channels
Programming JTAG or Bootloader

Schematics

Schematics

Data-Sheet

Phillips LPC

Crystal

Opto-Isolator

LDO Regulator/Reset Supervisory Circuit

Articles

Links

User Groups/Wikis

Software

Other Links


Electrical Homepage