Difference between revisions of "Bucki"
(→Design Overview) |
(→Pneumatics) |
||
Line 135: | Line 135: | ||
====Design Overview==== | ====Design Overview==== | ||
− | As a | + | As a flipper, Bucki launches its opponents into the air using rapid, impulsive force. To this end, it utilizes a liquid CO2 system to power an air cylinder and actuate its flipping motion. The liquid CO2 is stored in pre-filled 20 gram cartridges, which are inserted into a specialty regulator to reduce the operating pressure to an amount manageable by the most fragile elements of the design. |
+ | |||
+ | Upon exiting the regulator, the decompressed CO2 is held upstream of a 3 port/2 state solenoid valve, which allows for intake of air into the piston and exhaust following the end of its stroke. This solenoid is controlled using signals from a standard RC controller interpreted by a microcontroller. | ||
+ | |||
+ | Also upstream of the solenoid valve, the system features a bleed valve to empty the system following operation and a pressure gauge to monitor the regulator’s output. These components are connected with a variety of connectors and lengths of tubing. | ||
====Design Decisions==== | ====Design Decisions==== | ||
− | + | *A liquid CO2 system was chosen for its small form factor and reduced weight relative to the standard HPA design. HPA necessitates a larger tank that needs to be recharged, while CO2 cartridges can be switched out rapidly. | |
− | ==== | + | ====Calculations==== |
BLANK | BLANK | ||
Revision as of 23:51, 1 March 2022
Bucki | |
---|---|
Year Of Creation | 2021-2022 |
Versions | |
Current Version | V 1.0 |
Update Year | 2021-2022 |
Wins/Losses | 0/2 |
Information and Statistics | |
Weight Class | Hobbyweight |
Weapon Class | Pneumatic Flipper |
Combined Wins/Losses | 0/2 |
Weapon Speed | Around 80000? |
Other | Never moved lol |
Bucki is not the first iteration of a 18 lb Bent Bar Shuffler. Bucki is unfortunately the first iteration of the 12 lb pneumatic flipper. The purpose of this guide is to explain all of the reasoning behind the design decisions during the creation of Bucki. This guide will go in depth on why certain designs were chosen as well as explaining some of the calculations used to support those decisions.
Contents
Competitions
Motorama 2022
- Results:
- Bracket Style: Double Elimination
- Loss vs Hocki lmao
- Bot did not move and we immediately gave up
- "Victory by intimidation"
- Loss vs Who Knows?
- Bot did not fire and we immediately gave up
- Loss vs Hocki lmao
- Bracket Style: Double Elimination
Bucki V1.0
Created by: Daniel Johnson, Martha Leach, Mesum Zaidi, Natalie Van Slyke, Scott Janssen, Keaton Sadoski, Samuel Alzate, Anthony DeCesaris, Paul Barsa
Drive Motors | Turnigy 540L V-Spec Inrunner 810kv |
Drive Motor Controllers | HobbyKing Brushless Car ESC 2S-4S |
Weapon Motor | wind |
Weapon Motor Controllers | YEP 100A (2~6S) SBEC Brushless Speed Controller |
Receiver | Hobby King 2.4Ghz Receiver 6Ch V2 |
Remote Control | Hobby King 2.4Ghz 6Ch Tx and Rx V2 |
Battery | 2x Turnigy 2200mAh 4S 30C Lipo Pack |
(OTHER:) | MS-05 Switch |
Chassis
Design Overview
BLANK
Design Decisions
BLANK
Evaluation
BLANK
Drive Assembly
Overview
Bucki’s Drive system was not.
Design Decisions
There were none.
Calculations
BLANK
Evaluation
BLANK
Weapon Assembly
Overview
BLANK
Design Decisions
BLANK
Calculations
BLANK
Evaluation
BLANK
Electronics
Overview
BLANK
Design Decisions
BLANK
Calculations
BLANK
Evaluation
BLANK
Pneumatics
Design Overview
As a flipper, Bucki launches its opponents into the air using rapid, impulsive force. To this end, it utilizes a liquid CO2 system to power an air cylinder and actuate its flipping motion. The liquid CO2 is stored in pre-filled 20 gram cartridges, which are inserted into a specialty regulator to reduce the operating pressure to an amount manageable by the most fragile elements of the design.
Upon exiting the regulator, the decompressed CO2 is held upstream of a 3 port/2 state solenoid valve, which allows for intake of air into the piston and exhaust following the end of its stroke. This solenoid is controlled using signals from a standard RC controller interpreted by a microcontroller.
Also upstream of the solenoid valve, the system features a bleed valve to empty the system following operation and a pressure gauge to monitor the regulator’s output. These components are connected with a variety of connectors and lengths of tubing.
Design Decisions
- A liquid CO2 system was chosen for its small form factor and reduced weight relative to the standard HPA design. HPA necessitates a larger tank that needs to be recharged, while CO2 cartridges can be switched out rapidly.
Calculations
BLANK
Evaluation
BLANK
Links
See also
- [(link to other bot made this year) (Name of other bot made this year)]
Notes:
Naming Inspiration: Nothing good; should've been Topsi Turvi
Took least amount of damage of any bot in Motorama history