Difference between revisions of "Largetoni"
Jump to navigation
Jump to search
(→Problems) |
|||
| Line 94: | Line 94: | ||
==== Problems ==== | ==== Problems ==== | ||
| − | * ( | + | * HDPE axle was poorly improvised and not secure properly (too few threads, should've used Loctite) |
| + | * 3D printing manufacturing made it difficult to gauge weight and plan ahead | ||
| + | * Ramp caught on ridges and other imperfect surfaces - bot would have to build up speed to avoid getting stuck | ||
| + | * Wheels were too close to the frame and rubbed on side plates | ||
==== Good aspects ==== | ==== Good aspects ==== | ||
Revision as of 12:26, 14 May 2021
| Largetoni | |
|---|---|
 | |
| Year of Creation | 2020-2021 |
| Versions | |
| Current Version | 1.0 |
| Update Year | 2020-2021 |
| Wins/Losses | 0/0 |
| Information and Statistics | |
| Weight Class | 2lb |
| Weapon Class | Vertical Bar |
| Combined Wins/Losses | 3/0 |
| Weapon Speed | (number) RPM |
(insert summary here)
Contents
Competitions
2lb Competition 2021
- Results:
- Single Elimination:
- [W vs Varsiti]
- Mobility advantage made it easy to angle and attack
- Robots high drive speed made maneuverability difficult
- When the weapon made solid contact, it was able to flip and break armor
- https://www.youtube.com/watch?v=2iIDMOFIE18
- [W vs Humpti]
- Ramp was a disadvantage in this match: stuck on tape and bots armor was low
- Humpti appears to lose control of drive about 12 seconds into the match
- Humpti gets flipped on its side and is disabled for the rest of the match
- https://www.youtube.com/watch?v=mpOGiJIqHgk
- [W vs Guillotini]
- Lost control of drive for a few seconds (most likely debris under wheel)
- Guillotini was unable to land a solid hit on us
- Flip Guillotini on its side (technically a KO)
- Guillotini regains control, informally decides to resume, and Largetoni breaks its armor and knocks LiPo out
- https://www.youtube.com/watch?v=DqinOC4St54&t=1s
- [W vs Varsiti]
- Single Elimination:
Version
botName V1.0
Created by: (Names of Builders/Group Members of aforementioned version of bot)
| Drive Motors | 22mm DC gearmotor |
| Drive Motor Controllers | Scorpion Mini Electronic Speed Control |
| Weapon Motor | weapon motor name |
| Weapon Motor Controllers | NOT THE ONE ON OUR BOM. GRABBED FROM THE GRAVEYARD BAG. |
| Receiver | Hobby King 2.4Ghz Receiver 6Ch V2 |
| Remote Control | Hobby King 2.4Ghz 6Ch Tx and Rx V2 |
| Battery | Turnigy Nano-Tech 1000mAh 3s 45~90c LiPo Pack |
| OTHER: |
Problems
- HDPE axle was poorly improvised and not secure properly (too few threads, should've used Loctite)
- 3D printing manufacturing made it difficult to gauge weight and plan ahead
- Ramp caught on ridges and other imperfect surfaces - bot would have to build up speed to avoid getting stuck
- Wheels were too close to the frame and rubbed on side plates
Good aspects
- (list good aspects)
Changes/Improvements
- (list potential changes/improvements)
Notes:
The fly wheel worked great!
(Naming inspiration, optional)
(Names of original builders)
