Difference between revisions of "RC08-Dribbler"
Jump to navigation
Jump to search
(→Motor) |
(→Motor) |
||
| Line 4: | Line 4: | ||
==Motor== | ==Motor== | ||
| − | * | + | * Dribbler motor has been found and will be ordered soon (10/5/07) |
| − | * | + | * Source: MicroMo |
| − | * | + | * Motor: 12V DC brushless servo motor #E-1628B |
| − | **[http://www. | + | **$147.10 each |
| − | + | * Planetary gearhead: #E-167 gear reduction: 14 | |
| − | + | * Complete assembly 1628-V-0003 | |
| − | + | ** $200.40 each | |
| − | + | ||
| − | + | * [http://www.micromo.com/ MicroMo] | |
| + | * [http://www.micromo.com/uploadpk/e_1628B_MIN.pdf Motor Data Sheet] | ||
| + | * [http://www.micromo.com/uploadpk/e_167_MIN.pdf Gearhead Data Sheet] | ||
Revision as of 09:49, 5 October 2007
This page contains the information and documentation of the 2008 dribbler system
Contents
Motor
- Dribbler motor has been found and will be ordered soon (10/5/07)
- Source: MicroMo
- Motor: 12V DC brushless servo motor #E-1628B
- $147.10 each
- Planetary gearhead: #E-167 gear reduction: 14
- Complete assembly 1628-V-0003
- $200.40 each
- EE team's specification
- 12 Volts
- must have position or speed encoders
- brushless DC
Gearing
- Example geared down dribbler bar speed used in CMU robots ~7800 RPM
Dribbler bar
Specs from CMU
- Dribbler motor gear from SDP-SI: S10T05M042A0303 Module 0.5, 42 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear
- Dribbler bar gear from SDP-SI: S10T05M028A0305 Module 0.5, 28 Teeth, 20° Pressure Angle , 2024 Aluminum alloy Gear
- spur gear reduction 1:1.5
- Dribbler Motor - Maxon
- 266521
- http://test.maxonmotor.com/docsx/Download/catalog_2007/Pdf/07_154_e.pdf
- nominal speed 28200 rpm
- Gearhead
- 118184 - Maxon
- http://test.maxonmotor.com/docsx/Download/catalog_2007/Pdf/07_215_e.pdf
- reduction 5.4:1
- nominal dribbler bar speed = 28200/5.4*1.5 = 7833 RPM. It is, of course, adjustable by software.
