Difference between revisions of "Power Supply Module"
Jump to navigation
Jump to search
m (Completed parts list) |
(Loaded up images,) |
||
| Line 22: | Line 22: | ||
*DN4508-ND - L2 - 47 microhenry inductor | *DN4508-ND - L2 - 47 microhenry inductor | ||
*1N5822RLOSCT-ND - D2 - schottky barrier diode | *1N5822RLOSCT-ND - D2 - schottky barrier diode | ||
| − | |||
===JVC Camera=== | ===JVC Camera=== | ||
| Line 32: | Line 31: | ||
*C5 - 120 microfarad capacitor | *C5 - 120 microfarad capacitor | ||
*LED1 - LED | *LED1 - LED | ||
| + | |||
| + | ==Electrical== | ||
| + | |||
| + | [[Image:Power Schematic.PNG]] | ||
| + | [[Image:Power Board.PNG]] | ||
Revision as of 17:49, 3 March 2006
For many of the devices used on the IGVC robot, the 24V supplied by the batteries is too great. Therefore, a power supply module sits between the 24V fuse block and several devices. The module provides power to the IGVC Laptop and the JVC Camera specificly. Also, 12V runs out of the supply to a 12V fuse block, providing power for devices such as the Joystick and Sonar.
Parts
Laptop
- LM2678T-ADJ-ND - U1 - Adjustable regulator (set at 19V) for the IGVC Laptop
- C1 - 1000 microfarad capacitor
- C3 - 120 microfarad capacitor
- C6 - 0.01 microfarad capacitor
- R3 - 1 kiloohm resistor
- R4 - 14.7 kiloohm resistor
- DN2416-ND - L1 - 22 microhenry inductor
- MBR2535CTLOS-ND - D1 - common cathode schottky diode
12V Fuse Block
- LM2676T-12-ND - U2 - Linear 12V regulator for 12V fuse block
- C2 - 1000 microfarad capacitor
- C4 - 120 microfarad capacitor
- C7 - 0.01 microfarad capacitor
- DN4508-ND - L2 - 47 microhenry inductor
- 1N5822RLOSCT-ND - D2 - schottky barrier diode
JVC Camera
- LM2941CT-ND - U3 - Adjustable regulator (set at 11V) for the JVC Camera
- R1 - 7.6 kiloohm resistor
- R2 - 1 kiloohm resistor
- R5 - 2.2 kiloohm resistor
- C5 - 120 microfarad capacitor
- LED1 - LED
Electrical
