Difference between revisions of "Laptop/CAN Interface"

From RoboJackets Wiki
Jump to navigation Jump to search
m (Link to IGVC Laptop for code.)
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
[[Category:IGVC]]
 +
[[Category:2005-2006]]
 
The Laptop/CAN Interface sits at the head of the CAN bus and has a CAN address of 1, giving it highest device priority next to the [[E-Stop]].
 
The Laptop/CAN Interface sits at the head of the CAN bus and has a CAN address of 1, giving it highest device priority next to the [[E-Stop]].
  
Line 17: Line 19:
 
===Onboard Power Control===
 
===Onboard Power Control===
  
*[[296-12290-1-ND]] - U4 - 5V Linear Regulator
+
*[http://www.national.com/pf/LM/LM78M05.html UA78M05DCY] - U4 - 5V Linear Regulator
 
*[http://www.onsemi.com/PowerSolutions/product.do?id=1N4004 1N4004GICT-ND] - D1 - Diode
 
*[http://www.onsemi.com/PowerSolutions/product.do?id=1N4004 1N4004GICT-ND] - D1 - Diode
 
*P966-ND - C1,C2 - 10 microfarad Capacitor
 
*P966-ND - C1,C2 - 10 microfarad Capacitor
Line 26: Line 28:
 
*300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator
 
*300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator
  
===Receptacles===
+
===Headers===
  
*A19490-ND - J1 - Power 2-pin receptacle  
+
*A19423-ND - J1 - Power 2-pin header  
*A19491-ND - J2 - CAN 3-pin receptacle  
+
*A19430-ND - J2 - CAN 3-pin header  
*A19495-ND - J3 - Connect laptop to interface 7-pin receptacle
+
*A19434-ND - J3 - Connect laptop to interface 7-pin header
  
 
===Misc.===
 
===Misc.===
Line 44: Line 46:
 
==Code==
 
==Code==
  
See [[IGVC Laptop]] for information on code that controls that talks with this interface.
+
See [[IGVC Laptop]] for information on code that talks with this interface.

Latest revision as of 23:01, 13 June 2018

The Laptop/CAN Interface sits at the head of the CAN bus and has a CAN address of 1, giving it highest device priority next to the E-Stop.

Parts

Part numbers listed are those of the Digi Key Corporation parts database.

Processor

CAN Specific

  • MCP2515 - U2 - Microchip CAN Controller with SPI Interface
  • MCP2551 - U1 - Microchip CAN TransponderP966-ND
  • 770-61-R10K-ND - RN1 - 10k ohm Resistor Network, 5 of 6 pins are used

Onboard Power Control

  • UA78M05DCY - U4 - 5V Linear Regulator
  • 1N4004GICT-ND - D1 - Diode
  • P966-ND - C1,C2 - 10 microfarad Capacitor
  • 399-2127-ND - C3,C4 - 0.1 microfarad Capacitor

Oscillator

  • 300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator

Headers

  • A19423-ND - J1 - Power 2-pin header
  • A19430-ND - J2 - CAN 3-pin header
  • A19434-ND - J3 - Connect laptop to interface 7-pin header

Misc.

  • 377-1090-ND - Box to contain the module
  • 1892K-ND - Standoffs

Electrical

LaptopCAN Schematic.png LaptopCAN Board.png

Code

See IGVC Laptop for information on code that talks with this interface.