Difference between revisions of "FIRST Kickoff Workshop"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
===The Parts=== | ===The Parts=== | ||
====We'll Bring - Materials==== | ====We'll Bring - Materials==== | ||
| − | * | + | * Pre-charged batteries |
* A 17' x 37'board to mount | * A 17' x 37'board to mount | ||
* Pre-Cut 10 AWG wire for the Jaguars | * Pre-Cut 10 AWG wire for the Jaguars | ||
| + | * Pre-Cut 14 AWG wire harness for digital side car | ||
* A single 6 AWG wire for connecting the up the breaker | * A single 6 AWG wire for connecting the up the breaker | ||
* 6 AWG lugs | * 6 AWG lugs | ||
| + | * Velcro | ||
====We'll Bring - Tools==== | ====We'll Bring - Tools==== | ||
* 10mm Socket | * 10mm Socket | ||
| Line 17: | Line 19: | ||
* Jaguars and PWM cables | * Jaguars and PWM cables | ||
* cRio | * cRio | ||
| − | |||
* Power Distribution Block | * Power Distribution Block | ||
| − | * | + | * Digital side car |
| + | ** Also grabs its power connector | ||
===The Plan=== | ===The Plan=== | ||
====Mechanical==== | ====Mechanical==== | ||
Revision as of 15:22, 30 December 2008
Contents
Introduction
We will be building the basic kitbot using that materials given to you. There will be no cutting of metal
The Parts
We'll Bring - Materials
- Pre-charged batteries
- A 17' x 37'board to mount
- Pre-Cut 10 AWG wire for the Jaguars
- Pre-Cut 14 AWG wire harness for digital side car
- A single 6 AWG wire for connecting the up the breaker
- 6 AWG lugs
- Velcro
We'll Bring - Tools
- 10mm Socket
You Bring - Tools
You Bring - Materials
You Bring - Out of the Kit
- Anderson 120A breaker
- Jaguars and PWM cables
- cRio
- Power Distribution Block
- Digital side car
- Also grabs its power connector
The Plan
Mechanical
Electrical
- Crimp the Anderson connector for battery
- Connect power to Jaguars
