RC13KickerElectronics
Contents
Systems
Voltage Sense
We will have isolated voltage feedback. The voltage will be transmitted via a SPI ADC over a digital isolator.
ADC
- Vendor - DigiKey
- Vendor Part Number - MCP3001T-I/SNCT-ND
- Manufacturer - Microchip
- Manufacturer Part Number - MCP3001
- Cost - $1.96
- datasheet
- DigiKey
Charger
Flyback converter with LT3757 (~9.5A peak charge current)
FET
FET FQB34N20 overkill - but needed after the fire on rev 1 - 2007
- Vendor - DigiKey
- Vendor Part Number - FQB34N20TM_AM002CT-ND
- Manufacturer - Fairchild
- Manufacturer Part Number - FQB34N20TM_AM002
- Cost - $2.47
- datasheet
- DigiKey
- custom papers
LT3757
- Vendor - DigiKey
- Vendor Part Number - LT3757EMSE#PBF-ND
- Manufacturer - LinearTechnology
- Manufacturer Part Number - LT3757
- Cost - $4.40
- datasheet
- DigiKey
Transformer
- Vendor - Coilcraft
- Vendor Part Number - DA2034-ALB
- Manufacturer - Coilcraft
- Manufacturer Part Number - DA2034-ALB
- Cost - $5.29
- datasheet
- Coilcraft
Caps
We are gonna shoot for between 4000-5000uF by using two of the following
- Vendor - DigiKey
- Vendor Part Number - P13180-ND
- Manufacturer - Panasonic
- Manufacturer Part Number - ECE-T2EP272EA
- Cost - $12.86 quant 10
- Description - 2700uF kicker capacitors
- datasheet
- DigiKey
Trigger
The trigger system discharges the stored energy in the caps to either the chipper or kicker
IGBT
Rated 300V 400A. One for kicker, one for chipper
- Vendor - DigiKey
- Vendor Part Number - IXGX400N30A3-ND
- Manufacturer - IXYS
- Manufacturer Part Number - IXGX400N30A3
- Cost - $14.89
- DigiKey
IGBT Driver
Non-inverting MOSFET 1.5A Drivers
- Vendor - DigiKey
- Vendor Part Number - TC4427ACOA-ND
- Manufacturer - Microchip
- Manufacturer Part Number - TC4427
- Cost - $1.01
- DigiKey
- datasheet
4.7uF Ceramic Bypass Cap
- Vendor - DigiKey
- Vendor Part Number - 399-5507-1-ND
- Manufacturer - Kemet
- Manufacturer Part Number - C1206C475K5PACTU
- Cost - $0.68
- DigiKey
- datasheet
Tantalum Bypass Cap
- Vendor - DigiKey
- Vendor Part Number - 478-2359-1-ND
- Manufacturer - AVX
- Manufacturer Part Number - TAJC476K020RNJ
- Cost - $1.98
- DigiKey
- datasheet
Flyback Diode
- Vendor - DigiKey
- Vendor Part Number - 6A6DICT-ND
- Manufacturer - Diodes Inc
- Manufacturer Part Number - 6A6-T
- Cost - $0.52
- DigiKey
- datasheet
Current Limit
To try to save our silicon, we have decided to try to limit the current using a sense resistor, a comparator, and some logic.
Current Sense Resistor
- Vendor - DigiKey
- Vendor Part Number - FCSL90R010FERCT-ND
- Manufacturer - Ohmite
- Manufacturer Part Number - FCSL90R010FER
- Cost - $1.20
- DigiKey
- datasheet
Comparator
- Vendor - DigiKey
- Vendor Part Number - MCP6541RT-E/OTCT-ND
- Manufacturer - Microchip
- Manufacturer Part Number - MCP6541R
- Cost - $0.43
- DigiKey
- datasheet
Isolation
We need to isolate the voltage sense, and the kick signals. This gives
- Sense (SPI)
- CLK - IN
- CS - IN
- Dout - OUT
- Trigger
- Chip - IN
- Kick - IN
So we need 4/1 in/out isolation
Isolator
- Vendor - Mouser
- Vendor Part Number - 634-SI8451AA-A-IS1
- Manufacturer - Si Labs
- Manufacturer Part Number - SI8451AA-A-IS1
- Cost - $2.43
- Mouser
- datasheet
Power Supply
The DC/DC converter needs to power the
- ADC - 5V 500uA
- Isolation - 5V 6mA
- Comparator - 5V 5mA (ballpark)
- Comparator Logic - 5V 5mA (7400 series logic, probably almost nothing)
- IGBT driver - 12V 10mA (be sure to bypass Vbat with 4.7uF ceramic, 47uF tantalum)
So lets shoot for around 5V 50mA LDO and around 12V 100mA DC/DC converter
Isolated DC/DC Converter
- Vendor - DigiKey
- Vendor Part Number - 445-2473-ND
- Manufacturer - TDK-Lambda
- Manufacturer Part Number - CC3-1212SF-E
- Cost - $11.37
- DigiKey
- datasheet
5V 50mA LDO
- Vendor - DigiKey
- Vendor Part Number -
- Manufacturer -
- Manufacturer Part Number -
- Cost -
- [ DigiKey]
- [ datasheet]
10A Fuse
- Vendor - Digikey
- Vendor Part Number - F2973CT-ND
- Manufacturer - Littlefuse
- Manufacturer Part Number - 0157010.DR
- Cost - $2.80
- digikey
- datasheet
Solenoids
See the Solenoid Development page for more information. For logistics reasons, we may purchase a solenoid as we did last year and take it apart for use in our mounting apparatus.
Kicker Solenoid
- Vendor - Solenoid City
- Vendor Part Number - S-20-125H in 19AWG
- Manufacturer - Solenoid City
- Manufacturer Part Number - S-20-125H in 19AWG
- Cost - $48.01
- order link
- datasheet
Chipper Solenoid
- Vendor - Solenoid City
- Vendor Part Number - S-20-90 in 24AWG
- Manufacturer - Solenoid City
- Manufacturer Part Number - S-20-90 in 24AWG
- Cost - $33.56
- order link
- datasheet