RC10KickerElectronics

Systems

Voltage Sense

We will have isolated voltage feedback. The voltage will be transmitted via a SPI ADC over a digital isolator.

Charger

LT3750 Design from previous, with modifications to support ~9.5A peak charge current

FET

FET FQB34N20 overkill - but needed after the fire on rev 1 - 2007

Vendor - Digikey

Vendor Part Number - FQB34N20TM_AM002CT-ND

Manufacturer - Fairchild

Manufacturer Part Number - FQB34N20TM_AM002

Cost - $2.47

datasheet

digikey

LT3750

Vendor - Digikey

Vendor Part Number - LT3750EMS#PBF-ND

Manufacturer - Linear

Manufacturer Part Number - LT3750

Cost - $7.00

datasheet

digikey

Caps

We are gonna shoot for between 4000-5000uF by using two of the following

Vendor - Digikey

Vendor Part Number - P13180-ND

Manufacturer - Panasonic

Manufacturer Part Number - ECE-T2EP272EA

Cost - $12.86 quant 10

Description - 2700uF kicker capacitors

datasheet

digikey

Trigger

IGBT

Vendor - Digikey

Vendor Part Number - FGA180N33ATTU-ND

Manufacturer - Fairchild

Manufacturer Part Number - FGA180N33ATTU

Cost - $3.39

digikey

Fairchild FGA180N33ATDTU link

Solenoid

See the Solenoid Development page for more information. For logistics reasons, we may purchase a solenoid as we did last year and take it apart for use in our mounting apparatus.

• Candidate winding: 22AWG from http://www.solenoidcity.com/solenoid/tubular/s-20-125hp1.htm
• BETTER candidate winding: 19AWG from http://solenoidcity.com/solenoid/tubular/S-29-150hfp1.htm