Laptop/CAN Interface

The Laptop/CAN Interface sits at the head of the CAN bus and has a CAN address of 1, giving it highest device priority next to the E-Stop.

Parts

Part numbers listed are those of the Digi Key Corporation parts database.

Processor

• IGVC Laptop

CAN Specific

• MCP2515 - U2 - Microchip CAN Controller with SPI Interface
• MCP2551 - U1 - Microchip CAN TransponderP966-ND
• 770-61-R10K-ND - RN1 - 10k ohm Resistor Network, 5 of 6 pins are used

Onboard Power Control

• 296-12290-1-ND - U4 - 5V Linear Regulator
• 1N4004GICT-ND - D1 - Diode
• P966-ND - C1,C2 - 10 microfarad Capacitor
• 399-2127-ND - C3,C4 - 0.1 microfarad Capacitor

Oscillator

• 300-7022-1-ND - U3 - 11.0592 MHZ Clock Siqnal Oscillator

Receptacles

• A19490-ND - J1 - Power 2-pin receptacle
• A19491-ND - J2 - CAN 3-pin receptacle
• A19495-ND - J3 - Connect laptop to interface 7-pin receptacle

Misc.

• 377-1090-ND - Box to contain the module
• 1892K-ND - Standoffs

Electrical

Code

See IGVC Laptop for information on code that talks with this interface.