180i

From RoboJackets Wiki
Revision as of 20:39, 25 April 2025 by Dpatel800 (talk | contribs)
Jump to navigation Jump to search
180i
Year Of Creation 2025-2025
Versions
Current Version V1
Wins/Losses 5/2 - goated
Information and Statistics
Weight Class Plastic Antweight
Weapon Class Shell Spinner
Combined Wins/Losses 5/2
Weapon Speed spins fast

Plastic antweight shell spinner.

Competitions

UGA Spring Smash 2025

Version

180i

Created by: Aaron Qu, Deep Patel

Drive Motors Repeat 1406 Tangent Drive Motors
Drive Motor Controllers Repeat AM32 Dual Brushless Drive ESC
Weapon Motor Repeat 2822 Direct Drive Motor V2
Weapon Motor Controllers Readytosky 35A blheli_s Ant Weapon ESC
Receiver FlySky FS2A 4CH AFHDS-2A Mini
Remote Control Flysky FS-i6
Battery GNB 3s 300 mAh

Problems

  • the weapon motor gear was originally connected to gear at the shaft, the shell didn't spin cuz we needed a higher gear ratio. we later changed to making a ring gear in the inside of the shell and it fixed our problem. so gear ratios important
  • there was not a lot of space for electronics, but we figured it out with prayers (hot glue and zipties)
  • probably shouldve made the shell spokes thicker
  • driving was a very rough because the center of gravity wasnt centered left/right
  • forks are the death of us
  • also we never spun up past like 50% because it made it so unstable (it jumped)

Good aspects

  • it hit pretty hard, most of our wins were through tapout or ko and we tore the weapon completely off of jinx with half a shell
  • zip ties, hot glue, and electrical tape were good enough to keep the electronics in, nothing ever fell off
  • also nothing ever failed electronically which might have been a miracle (just make sure electronics are super secure)
  • self righting worked like perfectly every time

Changes/Improvements

  • thicken the shell spokes
  • very hard to drive so tangent drive to something else probably cuz no space for full 4wd (tank tread drive?)

See also

Notes:

playlist 14

it's like 360i, but not (the child)