Flashing ESCs for BattleBots Brushless Drive

From RoboJackets Wiki
Revision as of 18:32, 13 April 2018 by Lpasquarelli3 (talk | contribs) (Added link)
Jump to navigation Jump to search

One of the new trends in three pound battlebots is using a brushless drive because it is a lighter and smaller way to make your robot move. One of the hurdles to get over with this process is changing the firmware of the ESCs. Because they are typically designed for drones, the firmware they come with does not allow the motor to run in reverse, which is a must for driving. This article goes over how to flash the proper firmware onto a brushless ESC.

Equipment

  1. Afro ESC USB Programming Tool: https://hobbyking.com/en_us/afro-esc-usb-programming-tool.html
Retrieved from "https://wiki.robojackets.org/index.php?title=Flashing_ESCs_for_BattleBots_Brushless_Drive&oldid=16143"