Snuti
Snuti | |
---|---|
Year Of Creation | 2016-2017 |
Versions | |
Current Version | 1.0 |
Update Year | 2017- |
Information and Statistics | |
Weight Class | BeetleWeight |
Weapon Class | Drum Spinner |
Wins/Losses | 1/2 |
Snuti is an invertible 3 pound drum spinner with armor made out of rounded 1/16 inch HDP. We chose a drum spinner design because we had heard that drum spinners have a relatively high success rate, and we chose to make our armor rounded because we wanted to see if it would take hits better than straight armor. Snuti's drum is roughly 1 pounds, and it spins up to 8,000 rpm.
Contents
Competitions
Motorama 2017
- Results:
- Bracket Style:
- 30 Pound Division
Version
Snuti V1.0
Drive Motors | Pololu 9.7:1 Metal Gearmotor |
Drive Motor Controller | Scorpion Mini |
Weapon Motor | Turnigy D3536/6 1250kv Brushless Outrunner |
Weapon Motor Controller | Turnigy Plush 40A Controller |
Receiver | Hobby King 2.4Ghz Receiver 6Ch V2 |
Remote Control | Hobby King 2.4Ghz 6Ch Tx and Rx V2 |
Battery | Venom 35C 3S 1000mAh 11.1V LiPo Battery |
Problems:
- Armor pinched the wheel on one occasion, causing temporary loss of steering.
- Drive motors were unreliable.
- The belt driving the drum was not quite tight enough from becoming, so the drum would slip and decrease drum power.
- Drum bearings did not turn as smoothly as possible and were slightly misaligned.
Good Aspects
- The rounded armor held up well against the opponents weapons.
- The drum was effective when it worked.
Changes/Improvements
- Reposition the drive motor mounts so that the wheel is centered behind the armor.
- Try a flat belt instead of a V-belt.
- Switch to better quality motors.
- Realign drum bearings.
- Order spare belts.