RoboCup Electrical 2015

From RoboJackets Wiki
Revision as of 16:56, 6 September 2014 by Rosawa3 (talk | contribs) (Created page with "{{RCEELog |year=2014-2015 |control_ver=TBD |kicker_ver= |fpga=[http://www.xilinx.com/support/documentation/data_sheets/ds312.pdf XC3S100E-TQ144] |imu=[http://www.example.com...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Quick Reference
Timeline
Year
Versions
Control Board TBD
Kicker Board
Main Components
MCU AT91SAM7S256
FPGA XC3S100E-TQ144
IMU IMU-3000
Motors 50W
Battery

Electrical System

The electrical system is all the electrical hardware and firmware used to operate the 2014-2015 RoboCup team. It includes the host hardware, the wireless link, and the electronics for each robot.

Current Activities

Systems

On Board Control

Kicker

Power

Sensors

Radio/Base Station

Miscellaneous

Future Ideas

  • On-board speedgate
  • On-board vision (low latency sensor set for basic tracking)
  • Power switch replacement
  • Parallel battery packs
  • Make stuff easier to be transported safely (e.g. to competitions)...


Control Board 2011c Components

Moved to the Control Board 2011c Reference Page.

Links