FIRST Kickoff Workshop
Jump to navigation
Jump to search
Contents
Introduction
We will be building the basic kitbot using that materials given to you. There will be no cutting of metal
The Plan
Mechanical
- Speaker: Jevawn Roberts & Mick Roper
- Room: Klaus 1456
- Assistants: (5x People)(Stoian, )
Objectives
- Kit bot build
Tools Needed By Teams
- 3/16” allen wrenches (2), preferably a T-handle or screwdriver type or loop/wire handle for fast turning
- Cordless drill w/ 3/16” allen wrench bit is a plus !
- 7/16” combination wrench; having 2 is nice so teams can always find one when they need it
- General tools are always good to have on hand: Pliers, diagonal cutters, hammer, flathead and Phillips screwdrivers
- File
- Tape measure
- Marking pencil/pen/marker
- Chain break for 3/8” chain
Electrical
- Speaker: Andy Bardagjy
- Room: Klaus 1447
- Assistants: (5x People) (Stuart, )
Objectives
- Combined
- Control System overview
- Control System updates
- Separate
- Control System set up and wiring
Tools Needed By Teams
- Wire strippers
- Wire cutters
- Wire crimpers – a good one, $20-30, with handles 6-7” long
- Phillips screwdriver (#2)
- Flat Screwdriver
- Wago flat screwdriver (supplied in FIRST kit)
- 3/8” combination wrench
- 10mm combination wrench
- Tape measure
- 7/16” combination wrench
- Cordless drill small drill be set up to 3/8”
- Scissors
Controls & Programming
- Speaker: Rick Folea & Elan Grossman
- Room: Klaus 2456
- Assistants: (5x People) (Eohan, )
Objectives
- Controls and electrical rooms will be combined initially and will split up.
- LabVIEW overview
Rules
- Speaker:
- Room: Klaus 1443
- Assistants:
Objectives
- Gameplay overview
- Scoring methods
- Safety
Links
2009 Archive
We'll Bring - Materials
- Pre-charged batteries
- A 17' x 37'board to mount
- Pre-Cut 10 AWG wire for the Jaguars
- Pre-Cut 14 AWG wire harness for digital side car
- A single 6 AWG wire for connecting the up the breaker
- 6 AWG lugs
- Velcro
- E-net cable
We'll Bring - Tools
- Crimper
- "Tweakers"
- Hammer
- One set of socket wrenches
- Cadre of hand tools
Teams Bring - Tools
- Allen key set
- Wrenches
- 3/8", 7/16", and 10mm
- Wire strippers, cutters, and crimpers
- 1/4" and 3/8" bits and drill
Teams Bring - Out of the Kit
- Anderson 120A breaker
- Jaguars and PWM cables
- cRio
- Also get the two green 4-pos connectors
- Locate connector for analog card
- Be sure to place all the cards in the correct spot
- Power Distribution Block
- Digital side car
- Also grabs its power connector
- Wireless bridge
- Grab power supply
