Difference between revisions of "RC08Drive Module"
Jump to navigation
Jump to search
(→Gears) |
(→Gears) |
||
| Line 15: | Line 15: | ||
:Description - 0.2778" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm) | :Description - 0.2778" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm) | ||
:Drawing - | :Drawing - | ||
| − | + | :''Note - Al 2024'' | |
| + | |||
=====Output===== | =====Output===== | ||
:Vendor - SDP/SI | :Vendor - SDP/SI | ||
:Part No. - S1086Z-072A100 | :Part No. - S1086Z-072A100 | ||
:Cost - $21.36 ($13.46 in bulk) | :Cost - $21.36 ($13.46 in bulk) | ||
| − | :Description - 1.3889" Pitch Dia, 0.125" Face Width, 0. | + | :Description - 1.3889" Pitch Dia, 0.187" Face Width, 0.25" Bore |
| + | :Drawing - | ||
| + | :''Note - Al 2024'' | ||
| + | |||
| + | =====Output (Option 2)===== | ||
| + | :Vendor - SDP/SI | ||
| + | :Part No. - S1066Z-072S100 | ||
| + | :Cost - $17.72 ($13.02 in bulk) | ||
| + | :Description - 1.3889" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm) | ||
:Drawing - | :Drawing - | ||
| + | :''Note - Stainless 303'' | ||
Revision as of 19:35, 6 October 2007
Contents
Parts & Componets
Bearings
0.25 Shaft Diameter
- Vendor - McMaster-Carr
- Part No. - 57155K304
- Cost - $6.80 Each
- Description - Miniature Precision SS Ball Bearing - ABEC-5 Flanged Open, .25" ID, .5" OD, .125" Width
- Drawing - File:RC08-MC-57155K304.pdf
Gears
Input
- Vendor - SDP/SI
- Part No. - S1063Z-072A020
- Cost - $9.83 ($6.76 in bulk)
- Description - 0.2778" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
- Note - Al 2024
Output
- Vendor - SDP/SI
- Part No. - S1086Z-072A100
- Cost - $21.36 ($13.46 in bulk)
- Description - 1.3889" Pitch Dia, 0.187" Face Width, 0.25" Bore
- Drawing -
- Note - Al 2024
Output (Option 2)
- Vendor - SDP/SI
- Part No. - S1066Z-072S100
- Cost - $17.72 ($13.02 in bulk)
- Description - 1.3889" Pitch Dia, 0.125" Face Width, 0.125" Bore (must bore out to 4mm)
- Drawing -
- Note - Stainless 303
