Difference between revisions of "Chonki Design Guide"
(→Nested Concept) |
|||
| Line 56: | Line 56: | ||
== Weapon System == | == Weapon System == | ||
====Nested Concept==== | ====Nested Concept==== | ||
| − | Originally the shell was designed as a series of rings with progressively increasing diameters. | + | Originally the shell was designed as a series of rings with progressively increasing diameters. The method of joining these rings together was thoroughly discussed. The two primary options were use of fasteners and through welding. |
| + | =====Fastener Method===== | ||
| + | Pros: | ||
| + | *Avoids need to use welding (process with which we had little experience) | ||
| + | *Simple to align via hole placement in ring | ||
| + | *Easy to replace damaged bolts and or rings | ||
| + | Cons: | ||
| + | *Bolts are likely to shear under stress from hitting other bots | ||
| + | *Addition of holes to rings add stress concentrator, increasing likelihood of failure | ||
| + | =====Welding Method===== | ||
| + | Pros: | ||
| + | *Very strong joint between rings if done correctly | ||
| + | *Difficult to align rings and keep them aligned (flats were included on rings for this purpose, but a jig would still be required) | ||
| + | Cons: | ||
| + | *A single piece means the whole thing must be replaced after damage | ||
| + | *Welding is hard lol | ||
====Solid Concept==== | ====Solid Concept==== | ||
Revision as of 21:34, 29 May 2021
Chonki Design Guide
| Chonki | |
|---|---|
| Year Of Creation | 2020-2021 |
| Versions | |
| Current Version | V 1.0 |
| Update Year | 2020-2021 |
| Wins/Losses | 0/0 |
| Information and Statistics | |
| Weight Class | Featherweight |
| Weapon Class | Shell Spinner |
| Combined Wins/Losses | 0/0 |
| Weapon Speed | 0 on a pallet |
| Other | Chonk!!! |
Contents
Introduction
Chonki is a 45lb shuffling shell spinner competing in the 30lb weight class. It was developed during 2020-2021. The drive system was iterated from that of Apachi. The weapon system was a brand new concept for BattleBots. The goal of Chonki was to evaluate the viability of shell spinners while taking advantage of the 1.5 time weight multiplier afforded by using a mechanism other than wheels for movement. Has not been to competition due to COVID cancellation, but showed promise during development.
Members:
- Brian Epstein (Lead)
- Dylan Fife (Mentor)
- Mihir Nagaraj
- Mesum Zaidi
- Emily Liu
- Janie Edgar
- Celina Huang
- Martha Leach
- Cole Sosnowski
- Colin Lyman
Drive System
Weapon System
Nested Concept
Originally the shell was designed as a series of rings with progressively increasing diameters. The method of joining these rings together was thoroughly discussed. The two primary options were use of fasteners and through welding.
Fastener Method
Pros:
- Avoids need to use welding (process with which we had little experience)
- Simple to align via hole placement in ring
- Easy to replace damaged bolts and or rings
Cons:
- Bolts are likely to shear under stress from hitting other bots
- Addition of holes to rings add stress concentrator, increasing likelihood of failure
Welding Method
Pros:
- Very strong joint between rings if done correctly
- Difficult to align rings and keep them aligned (flats were included on rings for this purpose, but a jig would still be required)
Cons:
- A single piece means the whole thing must be replaced after damage
- Welding is hard lol
